The Jalopy Journal
No. I did not need a mini starter. I had a long history with that engine, and as I did a compete rebuild I realized I had somehow misplaced the...
[ATTACH] Here 'tis
THANK YOU BamaMav!! I followed your suggestion and starter situation resolved!!! Many thanks to you and the others here on this great board for...
On my other installations, NONE were mini starters. But on these other applications, these starters cost several hundred dollars and my goal here...
Electronic ignition. I explained the wiring in another reply. I have used this setup several times, cars, equipment, etc, and never had an issue....
You might be right. I had no real reason to use the small starter, other than before I had this engine in another car and when it got to operating...
The wiring is simple. Mount the Ford solenoid in the trunk, run the battery cable to it and the other side goes to the starter. Then the start...
Yes I am. The starter bolts are the ones for a starter. Not a hardware store item.
If I disable the ignition and turn the engine over it works and sounds just fine. But once I return power to ignition, this is what it does.
Yes. I used the tool that was sent to check clearance. The way I have this set up, I am using a Ford solenoid in the trunk, and the starter has no...
I am FINALLY driving my '30 coupe with a 350 chevy for power. All seems well so far, but each time I start the engine, the starter stays engaged...
I'm not far from you, I would love to see your build. I have two model a's in the works right now.
Thanks you guys for your helpful info. Let me give you a bit of the history, I currently have '40 ford drums on the front. Doesn't stop...
I am aware there are several kits available to put disk brakes on '40 round back spindles. My question is this: are there any kits out there that...
Buy a new, QUALITY(Walker, etc.) radiator. You won't be sorry in the end.
Walker '32 ford radiator set up for SBC-$40
I don't know about paint, flames, or other effects, but around here there are a couple of cars having a hell of a time getting insurance because...
Just finished my '30 sedan doors, inner bottoms and outer lower panels. Fit perfect and easy. I have used many other parts from them with...
Let us know when they are available
It would be the worst pain a parent can feel. Prayers are with you and your family and very sorry for your loss.
Doing this right now. If the word "alternator" doesn't bother you, it is possible to get a pulley to mount the fan to and run this in place of the...
yep every once in a while
#5 is mid '60's IH pickup
Welcome from central MI.........just north and east of St. Johns
'30 Ford 2 dr sedan.......flathead power
that one is a late '30 or '31. you need the one for an oval speedometer.
I might have an extra. Let me look, shoot me a PM tonite
Yep there is. Early Chevy car open drive course spline. It think 1955-1962, cast iron powerglide, and non syncro 1st gear stick trannys
I ordered on tue and recieved on fri from Texas to Michigan. They have always treated me very well whether I order on the phone or buy thru ebay....
Turn the firewall around and you won't have to cut it.
Separate names with a comma.