The Jalopy Journal
Nice...how did you get it that low Posted using the Full Custom H.A.M.B. App!
try to stand the transsmission on the tail shaft and rotate the input shaft back and fourth with out the front pump out. the gear train should...
The track in bakersfield should be done in Oct...
welcome from Bakersfield
not building a 50k street rod just having fun with a father and son project. any real ideas out there.
I need to lower my 1955 ford f-100 but don't alot of cash any ideas
I found that sombody had the wire from the ballast resistor going to the starter terminal on the solenoid.So i removed it and installed it to the...
Thanks for the info.I found that sombody had the wire from the ballast resistor going to the starter terminal on the solenoid.So i removed it and...
I just checked and I have power at both sides of the ballast.Then i ran a jumper wire from the batt to the coil and it stayed running.
Thanks for all good advice once this rain quits i will check all that out.
I just pick up a 1955 ford f-100 from a man who said he could never get it to run.After a couple of hours checking the fuel and spark i was able...
My 63 nova seems to be running rich (black smoke) at low rpms.I have installed a new carb,check the distribitor and bush and both are good. I...
Welcome to bake o. if you don't know what that means you'll find out in about a month .its cool area to live. Been here all my life and plenty...
He still lives in bakersfield up by the kern river...
Check out your local welding shop store..They will have seminars on there there new stuff
Loco Banditos.......
i built a couple of caddys..the parts are hard to find and expensive...you cant go wrong with a chevy...parts are everywear
no caps...........
http://www.jalopyjournal.com/forum/picture.php?pictureid=24471&albumid=2972&dl=1225168195&thumb=1
thank ..been out of the loop for a couple of years
were's snecky pete nash these days...last spoke to him at a little bar one block north of kiwi kinnection shop in bakersfield ca..
thank you .....after finding this place i finally got of my ass and started on the old projects...i look forward to getting off work .turning on...
i think squeak went back home to run his fathers farm...going to miss the good ol piss ups
looks aftermarket
they always send half my order...
wow....i am having the same problem.i have a 60 chevy brookwood with a 235...i was told 1958 235 and newer a turbo 350 will work...
Those guys there take pride in there work....i get all my parts from them .i needed my axle drilled and they let me use there drill press and...
good thing you made it out alive...metal dashs hert
there was a cool track above the skating rink in Pismo Beach...i spent more time there then the beach.
welcome.....i am new here too...have fun with the caddy.i built a couple of then and wish i never sold them .
Separate names with a comma.