The Jalopy Journal
Have a 50 pontiac silver streak and need a hood. Found a 51 hood does anyone know if they are the same? Thanks
I purchased it here in Iowa about a year ago, unsure if its been anywhere else
The other side is just as good. The worst part is the floor. Will need floors front to back. The roof is a dinged up so I got the other body for...
bump. still or sale
Decided to thin out my projects to focus on one. So up for sale is a 1936 Ford 5 window. Mostly complete and original. Body is fairly solid with...
Bump. Still for sale. 6500 takes it all
or some type of projector.....spotlight
a lighthouse light???
My 55 Holiday 88 the day I got it home. [IMG] shortly after paint. [IMG]
I've used hot rod flatZ twice now, I don't like it at all. It does look nice but it is really tricky to lay down. It will run easily, look streaky...
Does anybody know of a place that sells the fender side trim for a 52 Chevy sedan? I found them for 50 and 53's , but none for a 52. It seems that...
Appears to me to be late 40s. 47-48?.
I got an itch to build a COE after I get a couple projects out of the way. I found a nice solid 55 1st series cab over sitting in a field. Its...
I have a chance to purchase a 50 Studebaker starlight 2 door coupe. Body is above average, with rust thru only in the rear lower qaurter, and very...
Magnetic brake please!!!!!!!!!!!!!
Cut the patch first to the shape/size needed, then hold it up and scribe along the edge. dont try to cut exactly on your scribe line, leave a...
I stripped a section of surface rust and old paint off a trunk, there is still some small surface imperfections and rust pits. I stripped it with...
Very nice work!
I bought, repainted, dumped all the money into my 55 olds, and now I cant sell it to fund a 36 3 window....its her car now.
There is a kit on the market that works pretty slick, I bought mine from CPP. Its called a column saver. You disassemble the column, cut the outer...
Alright ill strip it....the heat must of been getting to me...
I'm midway through a full repaint of a vehicle. I have all body work completed and blocked out. Most of the car is still an old shiny black...
Any updates??
Just did my dads car with hot rod flats carnival red pearl. We wetsanded it with 1000 first. Then went over it with a grey scothbrite. We were...
Thanks.i checked it out all I found was a kit for 2 barrel rochesters. Will the adapter work on a ford 94?
What would i need to connect a tv cable and throttle cable to a 94 carb to maintain correct geometry? Surely someone has done this before. The...
If you filled that area in with 3/8 flat there would be no need for a rain gutter
I used 1/2" solid rod and bent it to the shape of the channel, welded from the backside through the holes. Where the round rod meets the stock...
I got 2 in the works...dads 29 Model a and my 52 chevy pickup
Separate names with a comma.