The Jalopy Journal
bump
I have a very nice set of Buick brake drums, 45 fin. There are no broken fins and the appear that they have never been turned. Measuring with a...
I have a nice '35-'40 frame that I really do not have a need for. It appears that someone has patched the inner kickups at one point and has done...
back up
Doesn't look like I am ever going to use this so here you go. It's in decent shape with no broken fins. The spark plug hole threads are a little...
If enjenjo can't help you, I have multiples of everything you need.
The newer V6 camaro T5's are very similar to the 93-93 S-10 T5's with the exception of a hydraulic release bearing. I have adapted quite a of few...
ttt
I have a set of square back spindles with a disc brake kit. It looks like the calipers are large GM and the bolt pattern for the rotors are 5 on...
Adapting a T5 to the truck bellhousing is fairly straight forward. The S-10, v6 Camaro and Mustang T5's have input shafts long enough to make...
Open to any and all offers..
bringing back up...open to trading, what do you have?
I put this thing together about 15 years ago and had grand aspirations on finishing it and making it look pretty. Once it ran and drove, well I...
I second the Napa route. I always order '65 F100 shoes and hardware kits when using '53-'56 backing plates and drums. '65 had self adjusters,...
That 3 speed adapter is very interesting. It doesn't look that difficult. The Ford u-joint is a standard SAE straight sided spline with all of...
I ship T5's via UPS all the time. It's around $70-$80. I take 3 pieces of 12"x 12" plywood and bolt one to the mounting holes, one at the tip of...
Over the years, I have made and still make quite a few S-10 4x4 T5 to torque tube adapters. I initially focused on the S-10 T5 because at the...
to the top
I have a complete front end with dropped axle and disc brakes that came out of a '40 Ford. The axle looks to be an older stretched dropped axle...
The number that you are interested in is the "1352-145" '85-'86 2.8 V6 S-10. I have used a bunch of these. They have the 3.78:1 1st and...
I put a Graham Supercharger on my roadster about 15yrs ago. It producrs just over the amount of power it takes to run it. They are certainly neat...
Scatownog, I have done this swap a couple of times and wanted to clear a few things up. I actually think we talked on the phone a while back....
bringing back up...
sold, pending payment
These are 5 on 4-1/2" BC. The rotors measure 11" OD
I have two 6 volt alternator conversions for a model A. One has all of the adjusting brackets and the other has just the lower bracket. One is a...
I have a disc brake setup for Ford round back spindles, 37-40. Everything appears to be there. It does not look like they were ever run....
Separate names with a comma.