The Jalopy Journal
nope, I'm pretty sure all prewar, (to 41) cars had the slinger type rear main. my 39 99A did, and a raised deck 42 221 block I did recently had a...
Full floaters work fine on a late crank. its the other way that doesn't work. check that you have a tube screwed into the oil drain on the rear...
Two avenues. 1. set up a very good PCV system to help keep stray oil away from the seal by creating negative pressure in the crankcase ( have...
Back up, if you are remotely interested in this deal, pls call and we can work something out, otherwise I'll just strip it of every sellable part...
Once again, for the cheapskates who want a rock solid fordoor body. Now with added rear fender and tailight pack!!
[ATTACH] [ATTACH] [ATTACH] Back up, anyone want this? Will include the rear guards to sweeten the deal, with taillights .
[ATTACH] [ATTACH] [ATTACH] Back up, most bodywork is done, the floor welding needs to be tidied up, all doors are rust free.. Needs a new home!...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi y'all , Here we have a nice fordoor body only, new floors welded in,...
I see what you want to do now, but I think you are better off reversing it, cutting off the mount ears and welding a flange onto the sector snout...
It will work if you REVERSE it. do you know what that means? well I'll tell you. The worm and shaft have to exit the other end of the box, where...
English manufacture Ford Pilot. you can tell by the cylinder number chart cast into the head. could be much later than 37-38, i think they were...
Im guessing your cam bearing journals have been turned down 0.010" to clean up scores whilst being reground, and the builder installed standard...
Its a rare moment when you feel out cooled by a bunch of A's when driving a 32.. but i did.
For some reason American master cylinders dont have residual pressure valves installed. if you look in the outlets of a typical GM master cylinder...
Usually its what engineers call 'tolerance stacking' ... Where you are trying to pull one carb back to idle through all the linkages, and all the...
yes the hoodsides are 32 chevrolet, well the centre section anyway. I really like the little potmetal teardrop handles on them. I got them off an...
Hi all, Thanks for all the nice comments on my truck and big thanks to Ryan for the sneaky feature! A few people asked for some details, so here's...
Its incredibly tight in a 32, even in a 33-4 it involves a lot of reworking of every part of the mechanism and the pedals to get it to operate...
i have 11" truck clutches in both my flathead cars. Mercs had 10" clutches. they are damn solid and dont slip although there is a weight penalty.....
fifty bucks from over here .. moved stateside and havent worked out where to get TRJ here yet.. so suits me!
I painted my 32 Roadster in Nitrocellulose lacquer sevn or so years back, and i love the way it looks, the need to buff it every year to stop...
Im no use to you now,i live in the USA, but i used to stock it. but i have ordered it before through handysteel in heidelberg west. Seamles, and...
Warn Keith that im going to come to his shop every day and sing along to shit eighties west coast yacht rock until he caves in.
where the body mount bolts are on an A cab , are actually up inside a hat section called the subrail, so you do need a spacer otherwise the body...
Are you running the oil to the FULL mark or higher? those year engines have no oil control in the sump, and if its a quiet runner you can often...
Not sure if he still does, but Mac van pelt a year or so back had a good stock of older USA made brass synchros.. I bought twenty of them , nearly...
super neat and handy idea! I build a lot of stainless exhausts from bends, and I think because I've done so many I can eyeball the cuts nearly...
ah the chortles didnt stop right through on that one.. The vimeo short doc world has caught up with us, overtaken and flipped the bird back over...
Seven and a half inches centre to centre when using 36 rear bones. works every time.
Fantastic documentation and really conscientious engine building!! Just a comment in Ross pistons, my last set came with 32 spirolocs as you...
Separate names with a comma.