The Jalopy Journal
Everything is SOLD Sent from my SM-G930P using H.A.M.B. mobile app
[ATTACH][ATTACH][ATTACH] Selling the whole lot for $200 obo Heads are 3837064 matching pair 3795896 and 3884520 on the other pair Intake is...
[ATTACH][ATTACH][ATTACH][ATTACH] Parts left from a car I salvaged. I prefer to sell locally. $200 for everything obo. Located in Springfield Ohio...
Posted using the Full Custom H.A.M.B. App! I'd love to help but of course you're far away. Hot rods are I've ever wanted to do but I'm...
Posted using the Full Custom H.A.M.B. App! The idea behind the weld through primer is to seal the lapped bare metal. A helpful tip in the future...
I would say its just crap. They make so many different primers its hard to keep track of them all. I've been experimenting with martin-senour...
If you read any of their tech sheets, you will find that most of their DTM primers are only good for areas smaller than 5"x5" without requiring...
I want to come down and watch this. What's the schedule going to be?
When I was a kid, the local Libraries used to have old books from the 50's and 60's that had a lot of his cars in them. That was where I learned...
That new Multi- hammer
Now that I know who's car it is, I know exactly what happened. It stayed in bare metal way to long and was even driven that way wasn't it? I know...
I see you mentioned calcium contamination. Is that a problem where you're from? How does it happen? You're not saying the bare metal has been...
I have googled and only found them in Nash vehicles so far(as domestic goes). I have a guy interested in it that collects ford stuff but I want to...
I have this bench seat that is supposed to be out of a deuce, but I can't find a picture of one that looks like it. It's actually in pretty good...
As I stated earlier, I agree it can work. But, this was not good example. The right setup would have cost way too much money to do and it would...
Well, I finished the car and delivered it on Memorial Day. I had to set the drag link back 4 inches from parallel and bend the steering arms down...
You're right. I thought about that shortly after I hit the submit button. The remainder of my parts come in tomorrow afternoon. I ordered the drag...
Well, see....the guy that built this is a short track racer so that's probably where he got the idea. But, he welded flat stock to the bottom of...
I won't put any bends or welds in either of them. Do you think the picture above would work if the pitman arm were mounted at that back 90 and...
I agree, but if I change to that setup I will have to change the headers and the steering column. I will post pics here in a day or so. You guys...
I'm having a bit of a problem making it work lol. It's a spring over axle and it sits out in front of the frame like on a t bucket.
Hey guys. I'm working on a 33 plymouth coupe for someone that needs the steering re- done. It has a 2x4 home made frame and an early-mid thirties...
You can run soda through a regular blaster but it will waste it.You need a unit that will mix more air with the soda so it will have more velocity...
Yeah, general rule of thumb is a few months. Try to give it some sunlight. One other thing I forgot....runs. If you run single stage and shave it...
Rustoleum is an oil based enamel. Lacquer will eat it. Krylon has a rust type paint as well and is also oil based. I just had a guy bring me bike...
I didn't think it was anything fancy, but I just wanted to make sure it was on the same plane as the front mount so I don't torque the firewall in...
Yes. I painted my dad's truck with black limco 123 enamel almost 12 years ago and people swear it's base clear. All I had to do was wet sand with...
So, I've got this 50 F1 I bought with the floor cut out from the bottom toe board seam to the front of the middle floor brace. Well, I need to...
I asked my DuPont rep about this a few years ago and couldn't get a straight answer. My question was , do you spread the filler over the primer...
I will be there as a spectator
Separate names with a comma.