The Jalopy Journal
ok cool. I think we will try flat clear. I want it to look like its still cast alum with no shine. thanks.
got a raw aluminum intake, was wondering if I can use flat clear on it from a gun. Don't want it to yellow but would like to close up the pores so...
Well I worried about it enough, that I ended up using a 4link calculator, and checking it all. turns out the angle is actually good for it at the...
Yeah they need to get a handle on the traffic jam situation.
Packards had air ride.
setting up a triangulated 4-link in the rear of my 53 hardtop, and was wondering if you guys are worrying about lower bar angles at ride height?...
Gambinos specializes in these. Take a look at some of his posts
I am in my shop every day also, except saturday. always working on something.
Better to wipe it with finish putty first then prime with high build. A lot less work in the long run.
If you come to Chattanooga, I can hook you up with some buddies. sunday we're having a surprise party for a friend and we're all driving old cars....
Aren't the side gears part of the axle? What did you do for that
How did address the front brakes. Using a 32 spring perch?
K&w block seal works great and is available in geogia Posted using the Full Custom H.A.M.B. App!
I just got a 3 year subscription to rod & custom and street rodder last year. what do I do now?
typically dome lights get power all the time, and the door switches ground it to turn it on. guessing it works the same way.
thats what I thought, just wanted to make sure.
will a 2" drop crossmember work in a 29 A with the stock radiator? doesn't look like theres two inches to go up without messing up the rad mounting.
should be the same spline. should work fine.
looks like its 7 am start. was like 10 or 15 to get in last year I think?
what size tire you running now?
you can use two screen strainers with small parts in between as well.
I think 55-57 is interchangeable. I have both grills for my truck, haven't tried the 55 one in it yet though.
doesn't matter how its oriented. they will work upside down just fine.
ok thanks, I'll check it out.
got a set of 16" wire wheels, and a couple of them need new tubes. I'm curious if I can use motorcycle tubes, or if I have to pay more to get...
29 roadster, pulled it out of an old building that was falling down. Got a few projects ahead of it but I want to do something along the lines of...
I would ditch the rollbar and call it good.
[IMG] [IMG] Heres a couple pics of the buick motor. it was setup as a powerplant for something. its not mine, not sure if I can get it or not. its...
is a buick banger motor a good one? didn't know if it might have the same head as a chevy, or some worthwile parts, or the whole thing is worth...
I guess it only works on the front wheels.
Separate names with a comma.