The Jalopy Journal
Check this out ! http://www.polfix.se/forstklassing-kromning-fran-polen-polfix Sigge!
I think i got mine from CaddyDaddy.com Sigge!
I Have one of those boats too ! 1956 serie 6219. I fix one thing and two new things break , Started with replacing a leaking waterpump but...
Just buy it ! I restored a 1959 edsel ranger here in sweden a few years back and ebay was and still is a good source fo parts. they are easy cars...
I had the same problem with a rebuilt sbc , it was the oil pickup touching the bottom of the oilpan. Sigge!
http://www.moparfins.com/repairs/Rear_Drum_Removal/Rear_Drum_Removal.htm
I work as a Farrier, spend my days hanging on to the legs of all kinds of horses! Sigge!
i Managed to straighthten out the right side of the trunk with the portopower, now i just have to weld in the new sheetmetal in the floor on that...
It will be a very tight fit involving a lot of fabricating. But since you have the car and the engine already why not! Sigge!
carbon dioxide fire extinguisher and a electric scraper!! sigge!
portopower
I pulled out one of my favorite tools, The vintage Blackhawk Porto Power! More pictures to follow when i use it to pull and push her trunk back...
At somepoint someone rearended the old girl without any lubricant , and that gave her some problems with the trunkopening. the right side of the...
2 inch blocks (vintage forged iron blocks not dangerous aluminium ones) and a set of airshocks
I live in Sweden and i buy a lot of parts from the states , i have tried diffrent shipping companies. And usps are by far the best ! Sigge!
This is our daily driver Dagmar! She runs ok and shifts well and the brakes are really good, the interior was redone about 5 years ago when she...
The engine mounts on the frame is the same too, you can use the same steeringbox too just replace the pitmanarm , maybe i can find a picture in my...
56 Belvedere , The frame on a dodge 1956 is the same for 6 or 8 cylinder cars, the only difference is the steering. Sigge
A to thick layer of bondo that didn´t cure enough before painting maybe? Sigge!
At least you where going out the door! Sigge!
They are pretty easy cars to work on. i´m soon ready to start a buildtread about my daily driver, collecting parts right now. Sigge!
Great looking car! I´ll take a 4 door car before a 2 door any day , ok so i´m odd Sigge
I´ll buy a plaque from you! I´m a odd one too. Your club need a Swedish chapter Sigge!
Subscribed ! I really like your work, It´s truly inspiring- Sigge!
It feels like you are trying to make everything as hard as possible! i just replaced the wheelbearings seals and brakecylinders and brakeshoes on...
Keep it and fix up the bad spots! I really like it, one of a kind!! Sigge!
Great cars ( i have one too)! I think that replacing the engine/trans is a goog idea for fuel economy! But you do not need to do the discbrake...
Subscribed ! This will be an intresting tread, i´m glad i´m not the only one that buys cars when everybody says don´t. Sigge!
Me and the boss at our wedding in june
Ther are engine mount kits for sbc in old mopars, http://www.butchscoolstuff.com/store/cart.php?m=product_list&c=27 And with some blockhugger...
Separate names with a comma.