The Jalopy Journal
Got one I have been dragging around for 50 years. use it to put screws in while working on things.
Did you try Mckensie?
Is it going to over in time for me to get home before the world ends?
The best era for cars started about 1894. Every year there has been something we could get behind and wouldn't be ashamed to be seen in.
There'll be new cruise spots somewhere. I quit working couple years ago. Gonna retire when I quit breathing.
Sign says "repent, turn from your sin". So I did an danged if there weren't another on over there.
According to the picture above it, its going to last 5 more days.:rolleyes:
Went to a friends shop recently where he was welding on the radiator support. He had his ground hooked to the battery negative. I moved it to the...
for some of us, it is a better have. If I didn't have mine, i would probably be a homeless bum
Anyone who is involved in this hobby has the "little bit better" syndrome. If they didn't, why would they want to change anything?
As is, where is.
The guy said to me after I ask about some tin on a foreclosed property. "I'm going to get some lunch. I'll probably be back in about two hours."...
Bore it till you hit water, then bore it some more and sleeve it back to standard.
Not a salesman but a customer. Bubba on the next stool commenting on a 25 dollar air cleaner i just bought. "I never buy the expensive ones. They...
The As look clunky to me. Always did like smaller lights.
I don't know where to start. Maybe the new 71 Honda 750 or the 60 Fi Corvette or the 65 air coupe or the 65 Riveara GS or the Latham blower or...
Hydroforming is very safe as liquids are not compressible. If something fails it goes spurt and its all over. No explosion. I had a scuba tank...
Can't say as I've ever seen them on a hotrod, but A couple of streetrods
Just last weekend, a turbo Firebird that has been setting there for at least 15 years left. Just never got around to asking.
Can't beat 54, but i bought 1/4, 3/8, 1/2 inch sets plus wrenches from 1/4- 1 1/2, extra rachets, screwdrivers, hammers, punches, misc pliers and...
Antifreeze will do that. vapors past the rings will infiltrate everywhere so a spun bearing isn't out of thr question. Usually you"ll get scuffed...
I'd have to go with a 58 352 bird motor and trans
Just a thought. When I was in my twenties, I changed the 6 in a chevy van without the aid of a hoist. I could also get a 55 gallon barrel of oil...
Think LT-1 hood
Never had any intention
You have a bad or dirty seat either where the body screws to the cutting head or between the cutter head and tip. If it has O ring seals, they...
The only difference between a 110 and a 220 or a 440 production welder is the speed at which the weld can be made. A 110 could be used to weld 2"...
There is a seal inside the axle tube that seals the rear. The seals on the bearing seal onlt\y the bearing and are not removable.
Been running AA in mine for years.
replace the modulator and plug the line back in.
Separate names with a comma.