The Jalopy Journal
I will go next week, and see if I can get the casting numbers off of one of them.
That is a picture of the rear end back from when I bought the car.
[ATTACH]
I pay for the materials. Not the labor. Are there numbers stamped on the wheel cylinders?
I got that from my pictures. It is also 5 on 4 1/2" bolt pattern. The front is from a Mustang II that had 4 lugs. I converted to 5 with the 5 on 4...
For that I will have to wait til I get the car back.
Hi. I have a Ford 8" rear end. I have had this car for 17 years now. I was told back when I bought the project that it was a 9". turns out it is a...
What size front rotors can you use with 15" wheels.
I am going to install it as one piece. There will be floor mats. Nobody will be sitting in the back seat. Will only be driving it a few times a week.
I always have to wear shoes. Diabetic. Have to be real careful with my feet.
The carpet I am looking at right now is also poster on that site you sent. A Super Flex Ozite. I am checking to see if I can get a sample.
Can that Stainmaster carpet be molded over the hump?? I built my floors, and there is a hump over the transmission. I don't want a bunch of...
It looks real nice, but are afraid of catching the loops?? Or are there any loops in this carpet??
That surface looks like the material I am looking at. I think it is like a cut pile. I guess it is kind of thin, but it flexes easy. I don't need...
Been doing some looking at Auto Trim Stores. A suggestion is for a cut pile carpet. To mold the carpet over the hump. Use steam, and spray on...
Hi. My 37 Ford Tudor is being finished, and will be painted soon. When I get it back I will be putting the door panels back on, and putting a heat...
At first after taking a loop out of the coil springs. It dropped maybe 2". I then put on 2" drop spindles. I couldn't put a pop can from the...
I have a 37 Ford Tudor. Had it for many years. I bought wheels and tires for it maybe 20 years ago. The tires are in great shape, but have to be...
Thank You all again. When it is all done. I will post pictures. I think the main reason it has taken so long is that where I worked. We only got...
Found it. Couldn't see it at first. Emergency Brake cable was just touching the drive shaft.. No noise now As far as the other stuff goes. I have...
Car weights about 2400 Lbs. Noise seems more back. If I have the car in the air in the back, with the brake drums off, and I put it in Neutral,...
Thanks for your help. All anyone says is get rid of the concrete blocks. I don't know if I can trust a 2" piece of cast steel on the frame.. My...
Okay. Would 6x6x12" work. I can get a 6x6 8' long. I could cut them every 12". lay down2 side by side, and put one on top, and screw it to the...
I will see if I can find a couple of tree stumps. Just have to cut them the height of the concrete blocks.
I have 4 jack stands. Still kind of scary. I have a wooden plank garage floor. Not flat smooth concrete. I will have to put down some plywood to...
Never had a problem with them. I put a piece of 4x4, or stack up 2 2x6's on top of the blocks before lowering it. I never come down fast. I have a...
I could have 1300 Watts in there, be half deaf like I am now, and it is real loud..
That is going to happen, but not til Sept.
I have those same pads in that car for 25 years. They were done right. When I had manual steering they worked just fine. I even put marks on the...
Separate names with a comma.
The Jalopy Journal
