The Jalopy Journal
Sorry for dragging this old post up, I guess I need a bigger phone, or better glasses!
What dimensions do you need?
Rust protection on a rampage or any 80's mopar! Funny stuff, they rusted on the dealer lots here in Michigan.
I'm sure your aware that some of those lugs are left hand thread. And thanks for posting up the vintage wagon gasser pics, I had seen one black...
My 56 wagon is heading in the same direction. Mine needs to come up some in the front end, and needs a different tire/wheel combo.......I'd be...
It moves under its own power for the first time in years.
Since this thread has strayed into the likes and dislikes of social media.........What is the best way to find instagram photos if your not on...
A bodys overhang the frame, not as much as a T though. 32 the frame pretty much swept with the body until the rear wheel area.
Stony Smith of Oddball Kustoms built a modern version called the Booch. I found these pics of it on his blog. [IMG] [IMG]
How about a coupe-up....with fenders of course. I'm not a big fan of resto rods, but I think this has potential. <a...
[IMG] http://www.mtfca.com/discus/messages/29/46355.jpg
Great thread so far. Its been posted to another T related thread, but here is my contribution. [IMG] I hope to make some progress on it this...
Just a couple of notes that I have found on the BIG trucks.... The front axle on 28-part of 29 AA's is the same as the passenger/pickup axle,...
35-36 ford truck
Check out Auto-Air/Wicked water borne paints, they are easy to use, damn near drinkable and cheap enough to experiment with. They are marketed to...
The M 6880-A50 angles the filter 90 degrees from the original orientation and has a tab cast into it the keep it from rotating. The D8UE-6884-AA...
Some of the resto books recommend some bars leak. The old trick was to apply some heavy grease to both sides of the copper gasket. If its a solid...
The serial number should be on the right front door post between the hinges. These guys should be able to help nail down the model #'s.........
http://www.fordmuscleforums.com/galaxie-pages/501074-63-kickdown-linkage.html
I think this is the Galaxie mentioned........[IMG]. [IMG] http://www.mecumauction.com/auctions/lot_detail.cfm?LOT_ID=SC0508-65922
This has a 9" from a 58 ford pick up, I would like to have a slightly narrower axle at 57" - 58" wide to keep the tires under the fenders a little...
http://www.jalopyjournal.com/forum/showthread.php?t=517125
De-Sta-Co clamps. I have some of the straight ones. Those that you have would be handy for tube fabricating....
Welcome, from nextdoor!
With the straight rotors, I'm guessing it was an industrial blower. There are tons of companys that build/built blowers for forges, air management...
Cut the centers out of some steel space saver spares. I used some gm 16"ers to replace the rusted out rims of some wide 5 wheels I had. Do you...
Sorry, I don't have any pics of the setup, and I don't have the truck anymore. I used a home built torque arm that looked like a longer version of...
If its an early AA the front axle is the same as the A's. The 30-31 AA's have larger axles, bones and spring widths. You can use typical hotrod...
Separate names with a comma.