The Jalopy Journal
I don't see "wickit Pissah" taxachusttes on this map!!! JImV
Seekonk spweedway in Seekonk, Ma is always trying a "monthly" swap meet. It seems that with the right people it could be turned into a great...
I was looking at a paint chip today & noticed that the paint on the car hasa very slight silver flake in it.The paint flaking on the roof does...
The paint job doesn't look new so its had to have been in alot of winters, but i think one problem might have been that i took it out of the...
normal Highway speed. 60 or so
Another problem with my 41 chevy!!! We have been having very cold temps up here for the last month or so with temps going down to -5! never had...
Its a 305/th350 with a 10 bolt. Everything else is stock( frame, ft. suspension, etc) Runs pretty good. I'm looking for 10.5 K for it.I have 12K...
anyone know the history of it? J
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I traded by T Bucket for this 41 chevy 2 door sedan, its a nice are, runs good, stops for shit but...
I have one of those cheapo tin turn signal switches in my 41'( the one with the green light on the tip) and the Left rear brake light won't work,...
1941 Chevy 2 dr. sedan, 350/350 with 10 bolt rear. has ugly rims on it! they could be covered with hubcap(Sombreros?) Has stock front end with...
Electric is not a option for me. I'll try the oil & see what happens.
The wipers on my 41 Chevy are vac. and not working right. When they are turned on the knob doesn't seem to move easy, to the right is off to the...
Which terminal should be the hot lead? the one with the resistor on it Or should that be the one going out to the fan? I seems like the red dot...
so if I just want to run it in one direction( Direct) & have 2 speeds what would it be then? And thank you very much. also if you notice the...
I have this heater switch that I bought at a Barn sale in Penn. a few months back, I was wondering if any one can ID & how to wire it up. I have a...
23 ford T bucket, 400 CI SBC, th350 trans, 67 mustang rear,Alot of extras, top is foldable or removable, has side curtains.Car is dry in the rain....
anchor them were the seat bolts down for the outside then maybe thru the hump with threaded plates on the inside. JimV
gear swap isn't a option right now, my cam is worn so its got to go.
stock heads, 1.94's nothing special. JimV
I have a 400 CI SBC in my T bucket.Its a stock engine ( dished pistons) with block hugger headers, Pertronixs ignition, 2.80 rear,Turbo 350...
you can tell by hole up near the top of the carbs were a choke butterfly might have been, Blanked out or idle screws missing or turned in tight &...
3 rochesters don't really need a regulator, they can run fine way up there, sounds like your secondary carbs are not closed enough.They have to be...
I spun a bearing on my 400 & and was wondering what has to be done to use a 350 crank in the 6.6L? I wouldn't mind making a 377 out of it. Any...
I run trips on mine with no regulator, I was told that Rochesters are OK with 8 psi.Strombergs need a regulator. when you say that its leaking...
In the late 80's( I think) GM was putting SBC engines in a lot of the lines so it might be possible that's were these came from. Are the bolt...
Was that the same as chevy? I thought it was a completely different engine. Just the same CI JimV
I've been running a 400 in my T bucket with a 2 core radiator out of a mitsubisi truck & never had it run above 210o in traffic, going to the...
I ran a 66 mustang there (225 HP,4 Speed, 4.56 rear) in 67 & 68. I have a picture of me somewhere racing a vette, I'll see if I can find it & post...
Car is too nice & rare to chop up. Get it back into decent shape & driveable.Have fun with it & sell it for a nice profit. Some cars just...
Separate names with a comma.