The Jalopy Journal
I wouldn't just install points without pulling the distributor apart enough to clean and lubricate the weights ... and make sure they are not...
btt
This is a Sun Model 506 which is the same as the 504 with the exception of a white flash rather than the orange. Works well. The vacuum pump is a...
"We went to Daytona the following week-end and met saw many of the same vendors. The good stuff sells fast." Exactly. Those vendors that are...
Early 30's, in this case 1933 through mid-year 1936. Not a '32. Identified by the 3-bolt coil attachment in the 3rd picture down. For sure.
First of all ... your '32 transmission is worth a few more bucks to somebody who wants an original '32, it that's what it is. If it is not...
1942 to 1948 Lincoln ... Zephyr ... 3 speed with Borg Warner R10 overdrive. " but I can open it up if it will be worth my effort." You mean you...
"I can check the valve timing better tomorrow if I must, and if I can find a degree wheel, but boy, I hate to take the radiator back off." Just...
Harold, "Putt" Smith in College Park, GA (Atlanta suburb) 770-964-6973. Very good reputation. You can also check with the Ford Barn early V8...
"Get a oil filled coil of 1.5 ohms etc hook it up direct and start the engine and drive it !!!!!!" "Oil-filled?" Bubba slipped a little...
Bubba, You are a brave (and generous) guy for wading into this thread. [IMG]
Maybe? http://www.snydersantiqueauto.com/3937 http://www.snydersantiqueauto.com/uploads/A7001A-8593.pdf
"What caused the spring tit to melt. I do not see a ballast resistor anywhere nor do I know if the coil has a built in resistor." Probably...
"I would check the series number to see if it is in fact a 78 series box, or a left over 48 series." Are you saying he should not use a 48- case?
You must keep in mind that all the advice you get may not be 100% correct, and that you must educate yourself and be able to identify the...
If your fuel pump has an attached glass filter/sediment bowl, check the bowl gasket for leaks. Common problem.
Only to give you a little warning about what may be ahead of you ... Prepare yourself for having to remove a valve assembly when the valve guide...
"PS Mr. Arutunoff was recently injured in an auto accident. Very serious. Doubt he will be able to attend." Unfortunately, you are, of course,...
Interesting line-up this year: Bobby Rahal as 2011 Honorary Chairman Hot Rod Lifestyle Seminar Panel to include Alex Xydias, "TV" Tommy...
Nevala, glad that you're on the mend. Just a note on removing the valves. It's one of the trickier jobs in dismantling a flathead. Tricky can...
"I don't want to hi-jack the thread,but can any of you tell me anything about the r.v. parking for visitors. Can't get much from the Moultrie...
"Actually its a Allen Testproducts Syncograph machine.." Roger that. I was thinking too much ... like the old story: Guy falls in a...
Great post with nice pics and explanation. Want to add the words, Sun Distributor Tester machine, to make sure this also comes up when someone...
Mac, What are your recommendations if he wants a diaphragm pressure plate to replaced the damaged original? (Our long-time local clutch...
This is used for the early distributors that bolted to the front of the engine. The distributor is removed from the engine and placed on the...
Rain_man, 1961 Florida should be a piece of cake. Almost every antique mall has a stall with a pile of 60's vintage tags. One thing that...
From the pictures, you have a 35/36 engine. IF the distributor is the original factory unit, it indicates the engine is 35/early 36. LB engines...
Model A frames bend ... from just the weight and running of a Model A engine itself. Model A restorations routinely start with frame...
600W is correct. But, "600W" isn't really what most would think ... it is not 20 times 30 weight. It was merely the products name. It was heavy...
Many Model A'ers use a modified end plate on the steering box to keep oil from leaking into the wiring harness. [IMG] Available from...
Separate names with a comma.