The Jalopy Journal
I used a 32 crossmember and avoided a lot of problems. Gave me Master cylinder mounting, 32 pedals, and rear transmission mount. All bolt...
Heading out on Thursday. Great show! Rooms got canceled but managed a room at the Fairfield.
Changed oil in the roadster. Went to the parts store to get a filter and was told the filter wasn't for an engine but was for a hydraulic system....
Open drive line you need to box the frame / Closed driveline the torque tube takes car of the twist, Also needs some type of K member. I used a 32...
Gary I used 49 Mercury mounts which raised the front of the motor almost 2 inch's
After 9 years of building, block sanding, and polishing first time out I was told ( Just another BLACK car). Still sticks in my craw!
On the calendar!!
32 cross member and enclosed drive shaft will make everything work great! Trash the A rear. 36 rear works the best in my opinion.
Is there anyone in Kansas that does this. I would certainly spend the time and money to have it done. Thanks
Certianly saw Them! Nice folks & Great Cars!
what center crossmember? split or unsplit wishbone?
That's a lot of oil pressure. I have 40 psi @ 2500 rpm and 20 psi @ 800 rpm
Sad News.
Its actually pretty straight forward. Use a 49 or 50 Mercury hogs head, flywheel, clutch and pressure plate. Trans bolts right up and I have not...
The air filters cost way more HP and Torque than I ever imagined! Its amazing to me how much work and expense to NOT reach 200HP. I agree with the...
Follow Mac's lead. I am very happy with the transmission that Mac built for me!!
I used a 31 DELUXE top irons and had Bentwood Bows steam been new bows the width of a 29 body and then chopped the irons to my taste. Folds great...
You can trust Gary as a STAND UP GUY! I bought my first 4 link from him in the early eighties. Defiantly not a scammer!!! Always a fair price for...
Thanks for the kind words!! It was a privilege to hang out with the COOL kids!
I have been hitting events since 1976 and this was the best event ever!! I have never seen so many great cars representing all areas of the...
[ATTACH] Looks like a great time!! Got the invite in hand. Hope the weather cooperates! Sent from my iPhone using The H.A.M.B. mobile app
Welcome from Wichita!
The 55 Chevy is realy a nice car. Bob builds some quality cars.
I used the stock riser and cut a piece of 3/4 plywood for the base. Opened up two holes about the size of your butt and then used lawn chair...
Changed oil in the Roadster & stuck in a new set of plugs!
These cars are all in VERY bad shape!!! No reason for any of you guys to come to Kansas. L.O.L.
I use ONLY a vein type pump. If its a pulsating pump it will push past the needle and seat. I also set the fuel regulator at 2-3 PSI
welcome from kansas
Not built to my taste but I admire the craftsmanship and attention to detail. Then consider it was built in the Midwest. I like to see all kinds...
I bought mine new and took it home and put oil in it and did't pay any attention to the directions on breaking it in. Turned it on and went to...
Separate names with a comma.