The Jalopy Journal
I have both inner fender panels, V8 core support, core support side panels, and inner fender extensions for a . All have been sand blasted and...
I have a new Saginaw 525 box that I bought by mistake. Thought it was a reverse steer. My mistake your gain. I will take $200 for it including the...
Saginaw 525 steering box off 1969 Camaro. Call me at 573 231 2731. I don't check my e mail very often. Price includes the ride. These work well on...
I have real Halibrands on my red 40 Willys and Rockets on my black 40 Willys. Of course, there is some difference in the wheels but the Rockets...
I've really enjoyed this thread. One of the guys I ran around with in Pekin, Ill. had a 57 Ford fake hardtop with a 390 FE motor, 406 cam and...
I have Wilwood discs on one Willys and GM discs on the other. I use the Corvette MC with one and an eighth bore with no proportioning valve and...
I just wondered why I do not have the privilege of replying to an add?
Has any body found a more modern yoke for a 1950 Ford differential than the stock flange? A friend has put a 302 into his 50 Ford coupe and would...
Personal choice but I think all tri five Chevys look best with out the front bumper.
Does any one know any thing about a Willys Gathering in St. Louis in August? A guy in Des Moines at the Good Guys Event asked me if I was going....
Ya forgot Home Brew in Hannibal. See ya at Breeders Saturday.
They sent me Motor Trend. I tossed it in the trash. Sent them an e mail requesting my money back. I had just renewed a couple months ago for three...
If you are looking for a lumpy sounding cam, I may have what you are looking for. I have a Big Mutha Thumper cam by Comp Cams. I have the lifters...
I built fender well headers for my 40 Willys. I bought bent tubing, collectors, and flanges from Speedway for about $225. What made the job...
I put a Chassis Engineering bolt in kit in a friends 50 and went in great. No problems. It already had a v8 in it and I didn't have to take it...
i just found out what USO of Missouri is. It is a non-profit organization to assist our military personal. I'm a HAMBer but I'm also a vet. I'll...
Or at least on map quest satilite it looks like an empty lott.
How are you going to screen the movie? 950 Des Peres Ave. is an empty lot. Are you going to put up a screen?
How ya gonna we'er HAMBers? But it don't matter. Me and the 37 Willys will be there.
I just bought the 37 Willys that belonged to Weasel's buddy. Those are 38-39 Zephyr tail lights.
The .298 is lift at the cam. Using 1.5 rockers ( normal Chevy ) the valve lift is .447.
Get a Lincoln Mark 8 fan and put a short water pump on it.. My 40 Willys ran hot in traffic with a 3000m cfm fan ( anyway thats what they...
They did a good article on an open trailer build in either Rod and Custom or Street Rodder about a year ago. The article also included info on a...
You may have to step up to a inch and an eighth master cylinder. I put discs on a 57 Chevy several years ago and it wouldn't move enough fluid...
our car club put one on a home built trailer frame. We had some new fenders broke for it and added a set of aluminum slots. We then installed a...
We have a 400 block bored and stroked to 421 and no problems keeping it cool. If you have trouble keeping one cool its in your cooling system not...
I bought a reman Ryobi power miter saw at Big Lots and then added a 7 inch cut off wheel from Home depot. Works great for cutting angles in metal....
call lokar about a bracket. I got one from them for the Ramjet in my Willys. Also call Larry's Electric tn Ruma, Ill., 618 282 2852. He has a...
If its a Ford motor, doesn't it already have an isolated solenoid?
Reminds me of the FLINTSTONE FLYER. Cool car. I wanted one too but my wife hates Studebakers.
Separate names with a comma.