The Jalopy Journal
I will save you all some trouble. These hoops are too small on the I.d. , I had to skim the centers and had planned on reinforcing the centers...
Any one know if the main shafts are interchangeable
To the top
Can anyone post pictures of their supercharger crankshaft pulley for a late model flathead v8 ford with the thinner pulley I believe it’s a three...
Pierce arrow was nice to see
I found items I needed on Tuesday and felt I had an edge since I was one of the few tracking thru. bought 26-27 roadster top bows for 400 $ and a...
No it is clean. I used a pencil grinder with a scotch pad to clean it. I also measured the pin with a micrometer. Its definitely .003” larger on...
thanks!! That all I needed to know. The set of pins I bought on eBay are forged and they look like a nice product. The seller said they were...
do you really speak to people like this. This is the kind of negative atmosphere that keeps people from posting. Were talking a difference of .003...
I bought a set of model a reproduction perch pins that look identical to the one sold by Macs autoparts, however the shank does not fit my...
[ATTACH] 1963 Buick spindles in great condition , threads and bearing surface great. mine backing plate is available for the drivers side.
Damn, I could use the rear half of the 26-27 touring body. I’m in ct though too far!
Sometimes you just have to drill it out. I tried the pack it with bread trick and wale on it with a slipfit dowel but it just didn’t work. I...
I don’t think Time or money is an issue for this guy anymore. He took home nearly 300,000 after taxes last year according to YouTube Adsense. He...
In case anyone was interested, it sold for 11000
I would remove the rust mechanically with a grinder and wire wheel. Then I would clean it with a alcohol solvent, and epoxy primer it followed...
I searched Hershey 2021 for a t roadster windshield and found one vendor. He had two of them. I couldn't find any other vendors. I should have...
I like some of the coach built car. One guy in particular built some prewar speedsters based off of earlier pre 40s drivetrains (3rd pic). [IMG]
Have a complete model a roadster top with good wood looking to trade for a roadster t top or 400$ will be at Hershey as a spectator
Please reference to photos, application is on box. Some not shown Glass 37 Pontiac, 35 gm truck 33-36 Chevy 41-47 Chevy Plastic 61 Buick le...
Remnant of a quarter panel. Will bring to Hershey 2021 in my truck, next week. I will be hunting for parts. There weds thru sat Text me at...
Looks like a stock 1937-1941 ford axle . You can pin point that by taking measurements of the centerline to centerline of perches and axle...
Is the additional bearing really needed. I’m working on a similar project thats nothing outside of the box. It’s been accomplished by a few on...
Can anyone help me with dimensions of the model t and a seats. I couldn’t find seat dimensions, and thought this thread might be useful for others...
Wow, thanks for posting. Clear and concise. Ready to continue pulling mine apart.
1961 Ford Tail Lamp Lens For Wagon Or Pass Brand new, made in the u.s.a. I accept PayPal and will ship within the USA
I’m happy that Matt is the owner. Judging by his YouTube channel, he’s got skills in building traditional hot rods and more importantly skills in...
I bought one of these hoops that you speak of but was unsure about how safe it would be to skim off 1/8” of the outer dia of the wheel center. The...
You are making me want to find a back half to my touring body
I have been saving the centers from my early Chevy and Ford wheels with the intention of installing them back in original type hoops. What I...
Separate names with a comma.
The Jalopy Journal
