The Jalopy Journal
Thanks
Currently doing a tour in South Korea, trying to get a bumper picked up and shipped to TEXAS. Anyone willing to help out a fellow hambler let me...
Thanks for the intel guys, I spoke with UEM the makers and the specs are the same as far as piston height and cc. The d is just an older design...
Not the same shipment, these are 2 individual sets of pistons. The specs are the same for both but one set was made in 2006 and the valve relief...
[ATTACH] [ATTACH] These are the same model piston, KB 118 for use in a 350 rebuild. I'm assuming there must have been a change in design at...
Thanks joyridin I'll try that Posted using the Full Custom H.A.M.B. App!
I will put the soap and water mix in and run it with a water bottle from the overflow. If I get bubbles I'll drain oil and hopefully find coolant...
Roger that, I will drain it and report back thanks for the guidance Posted using the Full Custom H.A.M.B. App!
[ATTACH]. This is what the engine oil looks like Posted using the Full Custom H.A.M.B. App!
[ATTACH]. Here is an aliquot of the coolant, Posted using the Full Custom H.A.M.B. App!
Thanks everyone for your thoughts, is it possible to have a bad head gasket and still get good compression test ? Posted using the Full Custom...
Yes intake was changed to a edelbrock performer but new gaskets were used there. I'm going to do the head gaskets and intake gaskets again. If...
81 SBC 305 runs great doesn't overheat. Trans cooler is separate from rad, flushed the block 4 times and I still have oil residue collecting in...
are you doing Bag over Leaf setup?
So if you don't have drop spindles there is no need to rotate the caliper mounting plates right?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190628895286&ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1798wt_1167 1...
Car has been an amazing journey but I'm all into my 2dr now and the time has come to sell this. Gone is the primer and in with the new paint....
[img] Frankenstein once said, "Nothing contributes so much to tranquillize the mind as a steady purpose." I guess that sums it up pretty damn good
[img] Modern gauges in 49 housings lit up nice, I know I will hear it from some but let me tell you knowing how much gas is in that tank is a nice...
[img] This was the starter nightmare... 153 Teeth would be what the # or teeth the dentist said Frankenstein had.
[img] Eastwood poo
[img] Headlight bucket operation nothing a little hobart action can't fix
[img] Lincoln after a walk in the acres
Well after about a week of nonstop grinding with Mr. Unionvillehaunt we both made this dream of mine into a reality. Many thanks to him and his...
Made my day seeing the updated pics of the '49. I am leaving Japan soon and I can't wait to see this thing start up and roll. Even if its a few...
Been a while since we update the post, new Gas tank is now in hand and custom drive shaft for the Camaro Rear that "bolted right in". Chris will...
Who made the rear tails in the bumper guards? I attempted to make some for my '49, just curious if those were bought or custom made?
[img] New dash gauges in original housing
[img] Tail lights are finished...
Emailed Chris the other day, he made some crazy 19 hour trip to get the remaining parts missing for the build. Sounds like he has everything...
Separate names with a comma.