The Jalopy Journal
Fixed
If it hasn't been mentioned yet, and not to discredit this guy, www.cartercutlery.com is another american knifemaker (originally canadian,...
Thanks for making me cry asshole ;) The thing that really got me in this film is the word EASY, and how the painters used that word expressively....
I guess countless hours spent on the internet and the HAMB looking at tech stuff has finally paid off :)
This is a good site with some simple diagrams http://www.streetrodderweb.com/tech/0203sr_drive_shaft_angles/index.html yea I know, streetrodder,...
extreme channeling would be the simplest way, without having to change any driveline stuff, thats if you want it really low. Id suggest a channel...
form puddle, dip filler, ease off pedal, move, repeat. Thats about as simple as I can put it, everything else is feel, and yes playing the drums...
I'm in the same boat as you guys, an answer would be appreciated, or even a picture of them installed on a motor so one could get a general Idea...
that'd be a nice mill, for one of my other projects, hauled the back end of a model A tudor sedan and the cowl out of the bush, plan on welding...
Its been a little while, got a little busy with moving into the new shop, and then forgetting to bring my camera there, like every day. Anyways, a...
I need someone to CLEAN my shop :D, I'll let you use one of my crappy chinese made ball peen hammers, where the rubber grip slides off on like the...
probably not as much Horsepower as the thing I get to drive on the rails [IMG] 4400 hp :D but in terms of style I think these old inspector...
this place says they have them, http://www.vanpeltsales.com/FH_web/trans-partsprices-pg1.htm
I assume, since I can't see the pictures, they are referring to "How to build a traditional ford hot rod" by Mike Bishop and Vern Tardel. Very,...
Aluminum also transfers heat A LOT quicker than steel or iron, therefore something that would normally "Feel" cool after a short run in the car,...
Update number 1, original crossmember was cracked/modified/who knows what, so out it goes and try my hand and fabricating a new one (hell it was...
pretty much all parts are interchangeable between the two from what I gather, If you're really fond of the old school look you can put 59a...
Hey man you got to cut StreetRodder some slack, for having a crappy name, and WAY too much advertising, I still can't resist buying that magazine,...
Definitely looking good, I started my 38, kind of going in the same direction. That was before I met the hamb, and rodders journal and all them...
Its a toss up between the Halibrand and the Winters v8 style quickchanges for the time being, Halibrand is nice because they throw in a pair of...
I saw that motor in the "Indy cars from 1911-1939" book I bought for my Old man, me and my brothers father in-law were both quite enamored with...
well apparently the guy I bought it from had made 2 cars from 3, so you never know, a car can travel a long distance in 40 years :D
yea, I was trying to figure that out, hence me sitting in it a couple times. I figure a 4" chop even wouldn't really bother me comfort wise, and...
I took woodwork, mechanics, tech ed, drafting, and during the rest of high school I drew pictures on almost any available paper. All in all I'd...
Finally hauled the Model A out of storage and started to get to work on the thing. Going pretty straightforward with the thing, for now, lets hope...
http://www.streetrodderweb.com/tech/0203sr_drive_shaft_angles/index.html you should be able to figure it out using the same mathematical formulas...
this is a very good article on this topic http://www.streetrodderweb.com/tech/0203sr_drive_shaft_angles/index.html
can't forget the obligatory. A Lot more if it was in My Garage!, Hot Rod!, Sewing Machine!, you get the picture. post :D
Revelstoke, BC here, land of the soon to be gigantic ski hill, and even more enormous house prices, my turd of a house was assessed at $450,000,...
Heres my stab at it, took a little while to dust off the ol'graphic designer part of my brain, everything has been consumed with car designing the...
Separate names with a comma.
The Jalopy Journal
