The Jalopy Journal
Looks like part of a growler, for testing starter and generator armatures. But then, it could be a whoydink for grinding smoke!!
It's not necessary to transpose anything. The engine I'm refering to was a backyard build, that was entered into the Engine Masters Challenge....
Check out the June 2008 issue of Popular Hot Rodding. 305 dynoed at 364 ft lb of torque at 5000 rpm and 394 hp. at 6300 rpm. Cool thing is, the...
Ok, Lets have the flashing light, and the brakes apply! Part of the recovery is making it hard not to notice something is going on. Beating the...
With the increase in stolen tow rigs from hotel lots etc. What ideas are out there to stop this, or help in recovering a stolen unit. With the...
Did the same thing for a homebuilt airplane. Bought the s/s tubing from the dairy supply people, (Surge, was the business name at that time.) and...
Tractor Supply sells ready made hyd hoses in 6 inch increments, I used a 3/4 inch by 18 inch with a swivel adapter on one end. Been on there for...
By the cockpit picture, it looks like it's a chaindrive unit. Wouldn't want the ol nads falling out of the pantleg of your shorts would ya!
Try carnut.com has just about everything you can think of.
Used to be pretty common, they were used as a static ground so the bearing surfaces wouldn't pit from the static discharge. They would have been...
Airplane guys are using the same idea that has been suggested. Know anybody that's into homebuilt airplanes? Or a buddy of a buddy?
12 volt marine horn, same size as a regular car horn, sounds about the same, and chrome to boot.
Other than the regular whacks and bangs received while working on cars, not much. But I did fall asleep under the car while in the driveway one...
I've found that most problems come from putting on the paint to heavy in multiple coats. Just enough to cover in one light coat seems to have...
Use an non working fridge or freezer, install a few shelves as needed. (Stand the freezer on end) with a 100 watt light bulb in it, and left on,...
If your looking to scratch build the whole works, here's an ebay # for a set of straight axle plans. #310006315059 Rob :)
Seems to me, there was a tech on replacing the capillary and bulb not that long ago. While I haven't tried it myself, it didn't seem to be to...
Check out www.348-409.com lots of good info.
Boy, are you going to be surprised when she answers the door wearing a HAMB t shirt,...............and has read all the "suggestions"!!
I'm running into the same problem. Plan on extending the upper brass tank so it looks a bit bigger, but as a seperate chamber to be used as the...
Wood Working 101, Plywood or hardwood cut to size, mount a bolt through the center, chuck it in the drill press and go at it with a air or belt...
There were a limited run of 1 1/2 ton Chev trucks produced in 1943. 714 Short wheel base and 452 Long wheel base trucks. Google Brad's 41-46...
Google "Lindsey Books" they have a whole whack of info, and books available on the subject.
The stick I have is in a aluminum tube, says on the outside it's bee's wax.
Check out Ebay 260150615532 tilt hinge plans. I bought a set as well as the straight axle set awhile back. I'm happy with what's there, haven't...
I've gave the earlier posts a quick read, and didn't see any mention of the problem of some M II upper spring pockets breaking out, and causing...
A truck parts place would have Grote brand parts, Grote sells all sizes being in the lighting business. I recently bought a couple of bags of...
What's the cost of a red eye flight, and car rental, compared to hiring a mechanic to look it over. Not likely anymore, may even be cheaper. Even...
Unless it's a direct deposit, why would he need that? You could open a new account, if needed, to look after this transaction I suppose. That way...
Separate names with a comma.