The Jalopy Journal
If I remember right, my '73 c-10 had one behind the 250"six. Gary
It's not going to kill it having only 5 PSI at idle. If it comes back up with the revs, run it. Gary
^^^^^^ Rocket 10 spokes. Gary
On my '36 Ford doors, when I cut the outer skin of the 1st door, the crown of the door went flat. I didn't know how I was going to get it back...
Your pair look a lot like the 15X7's I have on the back of my '36 pickup. Mine aren't marked, either. Gary[ATTACH]
On my '36, the bugs are on the front. Gary
^^^^^ My 327 uses this nipple with an in-line PCV valve behind the distributer. Gary
The outer canister slopes to the front and has a drain for the liquid oil that collects there. The inner tube slopes the other way and has a...
[ATTACH] My gas cap ended up about flush with my bed floor so I used an old kitchen sink strainer basket, with the bottom cut out, for a trim ring...
The Trick Flow site says they're for 4" min bore size. Gary
Clamp the leaves of the springs together. Gary
If you were closer, I'd make you a deal on a B&M Holeshot 2500 stall with lockup for a 700 R 4. I won't ship it. Gary
[ATTACH] I had the same situation. I spaced mine out. You can see the top bolt standoff and the gusseted , 3/8" bracket the box mounts to. The...
\ This must be the same setup that the Cordoba pedal I used had. Gary
[ATTACH]
[ATTACH] My son, yanking the 6 out of my '49 Chevy pickup. [ATTACH] A few years later, He's looking for a parking spot at the GoodGuys Heartland...
Years ago, when we all used junkyard parts, I used a master, booster and pedal assembly from a Chrysler Cordoba on a project. The pedal assembly...
"stroker motor" sounds better. Gary
I bought a '64 283 at an auction last summer and the block is now waiting in line at the machine shop, along with a 327 crank and a set of rods....
[ATTACH] My Iowa VIN sticker. The only reason I took this pic was to prove to an insurance company that it was registered legitimately so they...
I guess I'm not after perfect. I just cut the hose a little long and trim it square with sheet metal shears. Gary
The stainless material from a range hood filter would make sense to me. Gary
Am I the only one that has some of these in their garage stock? Gary
I welded a tab on my batwing on the pass side and made a spring clamp plate with an arm as far to the DS as I could, similar to how Ford did it in...
My similar combination seems happy with a 570 Holley Street Avenger vacuum secondary carb. Gary
[ATTACH] [ATTACH] [ATTACH] Pics of my dampener and pulleys. No numbers on any of them that I can see. The last pulley was piggybacked on the...
I just cleaned up the pulleys from a '64 283 I'm hoping to save and the crank pulley is 6 3/4" and looks like yours. It doesn't have any numbers...
https://www.competitionproducts.com/Head-Improvement-Kit-Chev-SB-194-150-Valves-Hyd-FT/productinfo/CMP8511/ A friend gave me a pair of bare 462...
I'd like to put a treadmill motor on mine with a variable DC power supply, if I ever stumble on to the parts. Gary
Tapped holes for the saddle clamps is another clue. Gary
Separate names with a comma.