The Jalopy Journal
That is Dennis Piranio's engine that has Pat Gary's Head on it , the engine is blown and ran on Methanol, Dennis ran the car at Bonneville in the...
If you find a source for billet cam blanks let us know I have searched high and low for the last few years very hard to find
I made the tool using a 0.625 reamer ( size of Chrysler lifter ) and had the end precision ground to 0.593 stock lifter bore size to make a...
Are these pictures of an A or B block about how far did you cut the deck to get to this point
Check Antique Engine rebuilding for valves they have new modern style valves the correct length with new springs keepers and retainers both stock...
Thanks for posting the info we uped the speed and qualified at 154.185 and went to Impound but still having issues left for home to sort it out...
These are what I use for anodes see attached link engine.html[ATTACH]
I wonder if exhaust tuning to help pull the intake charge into the cylinder `works with the Siamese intake port ❓
You will have "Good Vibration" now ‼️ vey satisfied with my Rattler flywheel from Winduptoy nice oil pump to .
Thanks John.........I think I have the same mistress as Steve Nelsaon........Looks like you spend a lot of time with the shop mistress to...........
I think I know of another one [ATTACH]
Thanks John ......Hope to see it run some time...............
I get it ..........Was hoping you might have some around from before you installed.....Thanks
Hi John can we see a picture of the cumbustion chamber side of the head and a view of the intake and exhaust port sides " Please"
Nice Rattler on that Blue Engine
WOW ‼️ that's some heavy Iron there John, or should I say aluminum...............
are you a witness to the crime ...............what do you have on your get away car
1. Picture of Moldex Crank, girdle, cam supports, ATI Damper hub, and adaptor installed on crank. [ATTACH] 2. drawing of crank to hub adaptor...
I run a ATI SBC damper on my Bonneville B engine, I made a hub adapter with a full length 3/16" ket way with a press fit on the crank snout, it is...
The heads were machined from 6061 by Pat Gary in Paso Robles CA , they are no loinger available. The lugs on the side of the head were for...
More Banger heads to chew on " look closely there are three different heads " Regular Head Dome Piston Head Reverse Flow Head [ATTACH]
Lion Head with machine work done by Piriano ❓[ATTACH][ATTACH]
Yes...................Thanks for the picture...........
I have tried all the ways to remove swaged studs, this is the method that has worked the best for me. When installing new studs in Old Ford hubs...
Specs for Studs Dorman 610-234 1/2" - 20 .621 Knurl 1 5/8" Length Dorman 601-109 1/2" - 20 .625 Knurl...
17" & 18" bent spoke
Baron Heads top of the line speed heads for V8 flatheads, new never been installed, out of storage from an Old time racer Call or text Steve 612...
Brumfield Head in excellent condition with ceramic coating in the cumbustion chambers Call or text Steve 612 860 4323 e-mail [email protected]...
bump
I have done exactly what you are doing many times ( original hubs, 610-234 Dorman studs and new Lincoln style break drums ) the drums are hub...
Separate names with a comma.