The Jalopy Journal
Update!! Wanting more power and a BBC, He bought a 468ci BBC, had to do a bigger recess for the dizzy and cut the motor mounts out, test fitting...
[ATTACH]
[ATTACH] [ATTACH]
Looking to get some striping done on my 50 Chevy truck and a Vintage bicycle. Who's around the Minneapolis/ St Paul area? any...
OH, the paint is all Plasti Dip, he likes changing color alot...
[ATTACH] He has since changed his mind on the Dirt track tires, now has some skinny ones in front, drives better. Still work to do, Bed floor,...
Well finally got some more pics, been busy with everything breaking, [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
thanks guys, I finally got it! the I think the 1st issue was the lifters were not all at the same level of pumped up, then the access to Intake...
I will run the valves again tomorrow,
So, I got the motor back together with the new rocker arm {thanks Trendz- money coming soon}, I adjusted the valves using adjustable pushrods,...
The ends neck down to 1/4" so ....
thanks, he says will send me a couple.
I know this is an old thread, BUT I ordered am TH350 from Monster transmission, and it leaked bad, I had changed out the Pan for an aluminum one...
well at least I didn't seize all the intake valves like last time - cost me 6K to fix that..... Still looking for spares drivers side #1 piston...
Not Again!- Well not as bad as last time, but who could have predicted an a exhaust rocker arm would break! Anybody have any extras I can...
[ATTACH] My 65 Classic 660 My dad bought in 1976(?) & I got it in 1982, still have it today
Never easy, but fun project with my son, so worth it.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]more updates, box side are temp till figure if to drop them, and how much to trim the bottoms
made my own shorter ones for the coupe
I did it on my 28 ford coupe and my 50 chevy pickup
Just a sbc and th350, although scored a runner that I am picking up this saturday. Also scored a th350 for $170. [ATTACH] [ATTACH]
My son wanted the dirt-track wheels and tires, we cut out the floor{ mostly gone anyway} and channeled the cab, I made the floor supports in the...
We are starting a new project, 1941 truck. Got a free cab and mock-up motor & trans. Building frame from 2x4 tube, dropped A axle (that my friend...
Have not posted for a while, but I did get some work done on my 50 chevy. New fog lights, I added yellow bulbs, they have like louvers or shutters...
Make sure you have carbon monoxide detector , I use one that plugged into an outlet.
What distributor are you using? I have a MSD ready to run.
Hot Heads has oil filter adapters.
A return regulator works well, keeps the fuel cooler- also a plastic or phenolic spacer under the carb.
I wear them alot, being a Biomedical repair tech, I am repairing equipment that could have(does) blood an/or bodily fluids on them, so I got used...
Separate names with a comma.
The Jalopy Journal
