The Jalopy Journal
It's not. Just look past that if you can.
Ardun heads and cheater slicks, case closed. Don't need no stinking fuel injection :-) [edit: I love the model of it on the table!]
Not to be a downer, but anyone building a FED today is only building a copy of art, not art itself. I'm more of a technology guy. I think...
Be careful with them. I just had to fix one of mine, as the stud holes became elongated. Had to weld them and redrill them, and then face the...
I think this is a picture of the guy who was bidding... [IMG]
Is "Spades" the name of the guy who drives the deuc'e?
There was nothing traditional, or anything considered a hot rod being crushed in that movie. Nothing but fearmongering remarks throughout this...
The thing to weigh your decision, is how the next 8 years will go as far as maintaining your physical strength, in the job you have. Can you...
You've never had a jug of piss thrown at you by an 18-wheeler driver :eek:
Stock tank, unless your bobbing the frame, in which case you put it behind the wife.
Yes, you're right. For some reason I remembered it being under the crank, and not off to the side. How many Dodge stands you got?
Yes. That's definately him in his youth. Swingle's probably around somewhere, ha.
Just bring an "optimum" set of spare points along in the trunk. 1.5 ohms doesn't sound like much, but in the ignition world, which commonly...
GND---->Dist<-----(-)COIL(+)----/\/\/\/\---->12 V IGN Switch
Judging from the amount of weight on the back, they might have been run with recaps in a previous life. The 4-slot design in magnesium is almost...
It's a voltage divider.
Haven't gone in 3-years... Got tired of the golf carts, and the shift away from nostalgia, with the martian FED's, and the swap meet gomers...
Not everyone wants to remain stupid. If you have a 1.5 ohm coil (with no internal ballast), then you need a 1.5 ohm ballast resistor. You can...
Watching her walk was just icing on the cake... [IMG]
Check each bulb individually. You should have two wires going to each signal light. A bright, and a regular. Touch each wire to a...
I knew someone around here would know how to spell.
...and then you get a job, get married, have kids, become successful. If you're still spinning your wheels, you are missing out on life.
The problem would be with the temperature variations. Cold freezing startups, to top of the curve thermostat temps. Metal expands and...
Shiiit... Who's this Jans guy?
The option to leave probably presented itself many times.
One thing to rmember, if you bore an engine .060 larger bore, then that's just .030 on each side. .030 is like the dirt under my fingernail....
Getting it stopped would be the problem :-) MP Brakes sells disk brake kits for the front-end. If you pop the valve covers off, you'll probably...
Mine as a panel truck actually, and so I had a "body tag" (not a VIN tag, ha) made in New Zealand, and stamped it with the engine number. That...
Should be on the firewall I think. I had a 54 dodge that was Oregon titled by the engine number, which happened to be a plymouth rebuild?? They...
Painless has kits.
Separate names with a comma.