The Jalopy Journal
got my intake back from the welder nice water jacket and welds will clean it up and get it back on the car will report this spring it it helps...
Got back from the welder water jacket complete now to clean it up a little bit and plumb it in I will report this spring if it works at the track...
i have my intake off for the winter season I am designing a water jacket that will run the length of the intake across the side of it. i would...
Tom Langdon has been messing with this same problem and he has modified a 4 bbl into a 3 bbl so very high flow at the lower rpm to help with the...
that makes sens do you think a vacume secondary might also help vs double pumper
engine temp makes not much difference but weather plays a big part cooler humid days are the worst I played with the carb and thought maybe too...
i am running a 650 holley dp have spent seasons fiddling and really just decided to do something with it after this summer. Its at idle and...
I thought i would post this here and see if anyone else has an opinion. My 292 6 with 4 bbl has a terrible off idle lag no matter what i do re...
haven't posted for a while but we finally had out first race up here not much change tot he car except a set of 9.5 - 29.5 MTs they made a...
Ive got a 650 on mine also close to same size what jets does it have in it.?? Mine works quite well you can fiddle with the accel pump for a...
Already got one ordered on flea Bay as I have been having problems getting mine going when hot, it seems to like the advance other than when starting
that is cool makes me think a small solenoid like a power lock actuator might do the same got me thinking now too
Its coming along the valvecover is great If you make a manual advance syst please show it as its something I am interested in
welcome from outside Speedy Creek :)
# 27 now # 333 Al Kaufmann Waldeck Saskatchewan Canada now a 292 with PG best 12.71 105 mph AL
MERRY CHRISTMAS from the far North Safe traveling and good holidays
Looks good nice positioning on the car
Looks really good I had to bolt in reinforcements in mine 1st time I stepped in with one foot I found that the alum was just a little too thin for...
nope looks fine
so that's how to blow a head gasket;)
I had the 8 inch pie crust tires on it, they are not as sticky as my Hoosier but still pretty good I have a hd gasket ordered (should have been...
All the runs were on the slicks, Its got a ton of torque as it will pull to over 3000 on the stall and brake, top end has a uncomfortable...
had our race this last weekend , car ran pretty good faster every time best 12.6 103 mph , ran good all Saturday got into the 3rd round and...
Its even more fun in a 1500 lb car :D
Its a 292 80 thou over with 366 3 ring pistons milled to 0 deck 11.9 -1 comp lump port heads big valves a lumpy smith cam(I don't know the specs)...
Here is mine just about 3 kids and just about 25 years
On the other side of the coin here is a pic of my 292 piston its got good squish but pump gas is a no-no :D[ATTACH]
Cool !!!
Nothing yet other than the 1/8 with the 6 inch tires our first race day was rained out and no race here till August 10th. This is my busy season...
Separate names with a comma.
The Jalopy Journal
