The Jalopy Journal
I bought a 28" one in Loovul a couple of years back for a Track T project. I pulled the plastic insert bushing out of the bottom, put a snug 6"...
I see that there are alot more people posting on this thread, so I'll repost a request I made nearly a year ago, hoping someone can help. My...
We have an Airgas vendor who stops by all the time at my company. He deals directly with Miller also. If you want I can fire him an email and ask...
When I was around 10 years old, my Dad had one of those old crank and knob gas lawnmowers that used to give him fits. He would unfold that crank...
Don, you have a great idea, and I'm friends with a few of the Hernando County Deputies who do side work. One thing you have to consider in Florida...
Spring Hill. West central coast. Between Brooksville and Weeki Wachie.
I've had a bunch of rods through the years, and a bunch of photos to go with each one. Some special, some not. I did keep a few for personal...
Talk to an attorney who specializes in that type of practice. He can research the laws for you. Don't rely on just calling an agency or Police...
That'll pull a sailor off your sister! Imagine the time and money spent.
1: "Call Me The Breeze" by Lynyrd Skynyrd. 2: "Flirtin' With Disaster" by Molly Hatchet (if the old car ain't running right) 3: "Cold Beer" by...
All the lines are clear and free flowing. There's no fuel filter in or on the Edelbrock carb, just a new aftermarket one in the line between the...
Push rod is in and on the arm of the pump.
Recently I posted about the 305 I have in a 30 sedan and the lack of fuel delivery to the carb. I installed a new mechanical fuel pump, and still...
The engine in my `30 sedan is a 1978/79 305 with a mechanical fuel pump. (It's all I had at the time.) The pump took a dump on me and I want to...
Are they still jamming the parking lot full at the Waccamaw? Check your PM's---!
I'm over 50 myself!! The 'old guy' is 73 and works part time at our shop. I don't have any pics of his motor, and I've never seen it in person ....
He's looking for the spacer that goes on the crank between the pulley and the harmonic balancer.
An old guy I work with is rebuilding a flathead for his 49 shoebox. He went with new heads, a c-4 trans, and switched to an alternator that uses...
Here in the Tampa area they have the "Tampa Machinery Auction". Usually it's fleet vehicles, dozers, track hoes, and a few regular cars and...
Looks an awful lot like the moldings on the `37 Plymouth P3 coupe I had a few years ago. Just from comparing them to pics of the 37 I have, they...
I tried posting this earlier in the year, but since alot of new folks have joined in, I'm giving it another try. My wife's brother in law was...
I can't tell if the carb is the problem because there's no fuel getting to the pump for it to send to the carb. I removed the in-line fuel...
You're right-mechanical. The tank is mounted on the back between the fenders, similar to a 32 set-up. No leaks-the tank is full. There is a fuel...
Chev 350 with manual fuel pump. 1930 Ford 2dr sedan. Parked the car about 6 weeks ago due to working out of town, and it ran fine when last...
If you are TIG welding. the Argon will not burn too hot for mild steel. You set the amount of gas through the torch by adjusting the gas valve,...
About 20 years ago when I lived in South Jersey, a buddy of mine opened up a body and paint shop. I helped him on the weekends in exchange for...
Why not throw something up front that doesn't reek of fad or popularity? A 171 C.I.D. Ford V-6. I had one in my Track-T, and the bastard would...
I might head down in the `30 for Saturday, but no gaurantees. Work is going non-stop, and if we're busy, then I'll have to pass. Too close to call...
I have been following the Vintage Sprint Car thread on the HAMB since the beginning, and I'm looking for pictures and information for my...
There is a metal cleaner that's sold in welding supply stores called "Arc Aid". It's a milky substance that's used to clean mainly aluminum,...
Separate names with a comma.