The Jalopy Journal
Ah yes, these have 3 terminals, yes? Battery “Gage” and coil.
Gage is hot “in”which should be from ammeter. Coil is just that, power to coil or coils when switched on.
I welded some shims up in there. I think I used a couple inches of the ends of a leaf on each side.
[ATTACH] [ATTACH] Here is another way to skin the cat regarding spring behind. Tube crossmember, stepped and narrowed/pinched to live between sub...
Tell us how you set up the distributor. On a machine? Static fixture? Straight edge method? If points are dialed, I would be looking at condenser....
Same ish as @banjorear [ATTACH] [ATTACH]
Are those 600x16 on there now?
Maybe try resetting the ubolts for the axle. You possibly could have the left side honked down a little more. Just a thought.
[ATTACH]
All of your thoughts (excluding Pertonix) is where I would start.
Mines a 33-36 axle as well. By heavy, I meant the amount of drop. The photos posted above are with a 4”. What you see in the current pics [ATTACH]...
[ATTACH] [ATTACH] [ATTACH] @Stovebolt lengthened frame to accept spring behind. Narrowed and stepped to fit in between subrails and live under...
The reason those mounts were made was to do exactly what you’re doing, but with an A spring.
Sounds like an intake leak of some sort. How does the engine react when you adjust the idle air screws?
[ATTACH] [ATTACH] Regarding alignment of brake actuator; with the spacer on top, you’re indexing off the bottom of the axle, which in turn...
I just looked at some old photos from doing this a few years ago. Spacers were on top.
[ATTACH] [ATTACH]
Sorry, I meant the length of shaft before disassembly.
What was it before disassembly?
Gas those ends and bend the spindle arms instead.
I’ve done it. Worked for a while then smoked the armature.
@Speedy Canuck exactly the photo I was referring to.
I’m referring to the ends. Are they dropped ends flipped? Which in turn would put the rod closer up into the 59 pulley and cause the brake hose to...
Maybe I’ve missed it, but what is the reason for using those style tie rod ends? It appears you have heaps of room between tie rod and wishbone.
Separate names with a comma.