The Jalopy Journal
i was debating for quite some time on what i was going to do. but once i ran out of dry clothes and one or two visitors to look at my parts...
did anyone go to the car show in the mud saturday. i left friday mid day due to the water issue.
thanks. i have the manual, tells you enough but not to descriptive and only one picture of poor quality. double checked with a friend who has a...
i have my dual rochester single barrel set up on my 235 chevy block. they have been rebuilt and almost all lines connected except my vacuum lines....
hello readers, i have my 57 chevy truck frame rolling and finished painted. ordered a body to frame mount kit. came with two 3/8 bolts, 2 two 1/2...
just finished my transmission wc camaro gear box wc s10 tail conversion. did a dry run with the camaro trans to original 235 bell housing making...
gas man, you got some shots of your custom shifter and crossmember? any image reference would be great.
I got a 94 s10 t5 complete. Will I be able to swap the tails knowing the s10 is electric speedo or do I need an older s10 trans?
iv read multiple threads on t5's camaro and s10. i know that s10 shifters are forward and camaro shifters are far back and between the two each...
patricks antique car and truck were very helpful. nice family owned business. fixed me up with custom throttle linkage for my chevy 235. they...
these are great shots. much appreciated. thanks marz. did you buy a new rod and bracket or make one?
bump
chevy 235, fenton intake and headers
i just installed a dual single barrel carb intake with headers and bolted on the two carbs. linkage came with the intake but i dont know how to...
hello all. i just installed langdons HEI distributor, 12 volt coil and new wires. iv read multiple forums about which spark plug to run on a 235....
for the 235/261 guys. when i got my motor back from the engine shop they did not give back the oil pump tube that connects to the block. i would...
new bushings, maybe. but getting these battered spindles off and getting seized king pins out is the issue.
sounds like a good deal BUT im about 5 hours north. the round trip i dont think would be worth it, but thanks for the offer.
they seem legit, but do they fit an i beam axle for a chevy pickup?
this project is old school, no front clips for this old truck and no bolt on IFS. i want this truck to be different from the rest and make it look...
spindles came on the truck actually, one is free and sloppier then joe sandwich and the other is seized. both are beat to a pulp. when i said i...
hello all, i am in the process of building my 57 chevy pickup front end and im running into a bump in the road. iv got my 3 inch dropped axle...
yes those work, but a friend had them on his pickup and they can get annoying with the constant "tinging" sitting in traffic or stop light. best...
well im too young to know of that show, but a quick google search and a little reading, i will agree with you that those are nice "stacks".
i personally have no intention on doing it to my project truck. iv seen them here and there on old classic trucks, nothing serious like 4 foot...
yay or nay on having stacks or stack on an old pickup. old as in early 60s to late 40's. reasons, pros, cons, pics. let me hear or see your answers.
stock s10 rears sit on top of the leaf springs, opposite of a normal full size chevy. i cut mine off and relocated them to the top of the axle. so...
i used this website for a reference. napa auto parts has 9/16 threads, 2.75 ID and 6 3/8 length ubolts in stock.
i got a 96 s10 blazer rear the 3.42 and its getting put on a 57 chevy pickup with 3 inch drop springs. i put the new leaf spring perches on top of...
i dont have the originals. when i bought the axle i bought it from a used parts dealer, they junk the hardware usually. and auto stores go by...
Separate names with a comma.
The Jalopy Journal
