The Jalopy Journal
Up for sale is a project I had plans of finishing but I just don't have the time. This is a 1949 Kaiser Travler which is the first year for this...
Get the nozzle kit for it, it is a pack of 3 nozzles. I have a Edelbrock 1411 on a dodge 383 and went through the same thing with the mid-range...
The 96?5s is the carb number. I want to say it is a 625cfm carb the only numbers that it could be that start with a 96 and end with 5s are 9625S...
Thanks @ least now I know what I have here.
Picked up this axle looks like maybe a chevy but not sure the kingpins are smaller than th 47-55 p/u axle but I was thinking maybe gm car? It also...
I'm using the kit from weedeter(sp?) On my 39 ford sedan. Its a bolt in setup and mounts the springs inboard so the rear of the car will sit lower...
Get a different block...the 327 shares the same bore as a 350 4" where the 283 has a 3.875" bore.I do not think you can safely bore that block to...
Yes they are unless it is a one or 2 ton truck.My brother in law has a org. 42 p/u and it has the same frontend and hood as a friend of mines 46....
Oh a Hudson im so sorry for you. You really do not want those hudson engines they are boat anchors. You should just pull the engines and put a sbc...
Damn I might have to finish something now.I would be in for sure and I nknow a couple others that would be in to it as well. Zingo's would be cool...
Or you can use the water pump kit from Snow White Ltd. It shortens the front of the engine 2" by which might give you enough room to not have to...
http://www.youtube.com/watch?v=Gd4Aj4tbf50
The rearend from a '73-87 chevy truck is the easiest to use if you can get a '82-87 with the factory 700r4 they had 3.73 rears in them.
Traditional not really different yes. If thats what you want then go for it they are pretty cool looking engines.Hell most people would scratch...
You got it
Hers another one [IMG]
Nope
It is infact a Allis Chalmers gas powered 4 banger. Cool little engine
Yep.....its a tractor engine...but what kind?
Another one [IMG]
ok I will throw one on [IMG]
I agree 100%. Are you going to run a auto,auto with o/d,4 or 5spd?Also what size tires are you going to run? Overall height of the tire will also...
I was looking for there site the other day as well.I have found it once but lost the link.
Im going to say 3.08 my the wifes 65 elco had a 283 and 3 on the tree with 3.08 rears.My friends 65 chevelle had 3.08's and another friend of his...
That figures im building a 354 poly and thats what im looking for.....so close to the house too.DOH!!!
The suspension is about the same on both other than the bones as rustbelt said.Did you have tube shocks on both and did they both have the same...
I think your making the right choice I just had to throw in a 46 pic. I have a 34 3 window sitting next to the 39 sedan im building right now and...
I would still go with the 40 myself but seeing how I posted some 40's I should post a 46 so here goes. [IMG]
One more pic [IMG]
Here is something that might help. [IMG] Hard to beat the lines of a 40 for fat fendered cars.
Separate names with a comma.