The Jalopy Journal
I once installed a Holley pump inside a plastic battery hold down box and insulated the box inside and outside. Easy to do with just two holes to...
It's the fuel pressure!!! install a regulator and set it at 4-4.5 PSI and the problem will go away. By no means increase the pressure to 7.5 PSI
I don't understand why sellers bitch and moan about getting ripped off when you don't secure your stuff? Friday am I heard a guy bitching out a...
Found some signs early Friday and a Atlas thermometer $8.00
I had a great time and the weather was great, scored a couple of double sided porcelain signs and a tailgate for my truck.
I would check fuel pressure and lower to 4.5 PSI. I had the same issue this summer and installed a regulator and fires right up every time after...
Alcatraz is a hard ticket to get, it sells out weeks in advance and being a holiday weekend it will be tight, try to purchase them in advance if...
Do not plug the power valve, That's only used in full on drag racing. Just get the correct power valve after a vacuum reading.
Awesome tip, Could you let us know what brand foaming cleaner that was that worked for you.
Terrible advice, I own a pest control company and can tell you that this will not work. If it did work I would use this method without having to...
I don't give parts store employees crap, they are just doing what they are trained to do by the book. Trust me, the 25 year old girl behind the...
Try a glass sediment bowl to catch crud and drop in a couple strong rare earth magnets to catch metal until it all clears up. Just a thought?
As pretentious as you sound I'm really shocked that that fuel filter was so dirty. Own it!!!
Dude really? how often do you change your filter? I have better looking filters on my lawn tractor. You get what you pay for with those cheap ass...
Why don't you just install a fuel pressure regulator and set the PSI to 4.5 or 5 PSI like everyone else who runs these Edelbrock carbs and be done...
It doesn't matter if your using AC Delco, Champion, Autolight, Jap plugs, ect. If your heat range is off and your tune is off they are going to foul.
As usual you are giving bad info, So what you are saying is that everyone should run a Edelbrock carb at 6.5 7 PSI just like you do with no...
I would bet your gauge is reading the wrong PSI. Myself and many others have installed a regulator and dropped the pressure down on these...
I bought mine from a E-bay store called Lugnut king he also sells bullet lugnuts .
I have had good results running 4psi with dual Edelbrock 600 cfm carbs on top of my 6-71 blower. Before I had flooding issues with a stock fuel...
Looks great with neon.
Looks porcelain and with the right neon installed by a pro I would think that sign could fetch over $3,500+
X2- I would think that it would be the state department of agriculture weights and measures dept. they usually inspect the gas octane as well.
Da Fuq, why all the hate? would all you stick up the ass weird guys like it if he posted a boring slow test drive of a plane jane Biscane with 3...
Another thing to consider is to flip them over once in a while and tap them with a rubber mallet and all the ones in the shop also.
X2- Valvoline VR-1 is a great choice with the extra ZDDP. Been using it for over 20 years.
Don't forget to install a thicker carb heat soak gasket under your new carb. Your carb could be boiling fuel inside when hot.
I have one of these, Work with a SBC long style water pump.
They can also cause cancer and are highly toxic to young children and pregnant women. Very bad advice!!! Google moth ball toxic side affects. The...
Hate to tell you but these units are a scam also. If they actually worked all hotels and the restaurant industry would use them exclusively.
Separate names with a comma.
The Jalopy Journal
