The Jalopy Journal
Yes Yenny is a true artist. I met him a few years ago, a really class act.
This past weekend at the Race & Performance Expo in St Charles, IL 8 artist (including yours truly) gold leafed, lettered and pinstriped a Pinto...
No, just driving the dragster at the end of the video.
Didn't know that video was out there, Thanks
Wow, a little trip down memory lane. The dragster in the picture is our twin engine nail head buick, original built by Ivo and the one in my av,...
I have used Kustom Shops matte paint and love it. It is easy to shoot and dries to a very even finish. I have tried gloss paint that the paint...
Never made anything like this before. It was we had this wheel donated for the auction. We had the zoomie pipes left over from another project. So...
It looks great. I like auto parts made into decorating items. Here's one I made from a donate wheel and left over zoomies. It will be auctioned...
It sounds like it is in the ignition switch, that there is only power to the starter not the coil. Have someone check if you have spark at the...
I think you mean 4 3/4 not 5 3/4
If you go to Kustomshop.com they have over 60 colors. This is a satin urethane that you use their hardener. It is easy to spray and gives a very...
You asked so, vinyl lettering is NOT in any way traditional and should be done on anything that is on this forum!!! Get it hand lettered or don't...
If you clear coat within the 12 to 24 hour time frame, depending on which base coat you are using, it is not necessary to sand the base coat. In...
I have also used them without a backing plate and had no problem.
First of all you can use 30w non detergent motor oil, auto trans fluid, mineral oil, lard oil, cooking oil or what I use is a good brand of brush...
why!!!!!!!
I would not use odorless or low odor mineral spirits, it has some water in it. It doesn't work well and may loosen the hairs on your brushes...
As i remember it started when the ohv Olds andCaddy V8's came out. In the early 50's you could hardly give a flathead away. People were trying to...
I'm going will be it the Ball Busters Car Club tent near the space needle. Stop by and say hi. Absolutely the best show to go to. A bucket list...
I assume you are using 1-Shot paint? Go to a paint store or Ace Hardware and get a can of Penetrol. This is a flow enhancer and is better then...
Here's four pinups I just finished inside a pizza restaurant. They are about 52" tall and are painted on brick columns. The interior is industrial...
Get a 10 series, blue wrap, #000 Mack brush, One- Shot paint, a Quart of Mineral Spirits, a can of Penetrol and some thing to practice on, glass,...
Do it right, call a signpainter and have him paint in the letters. Vinyl is not traditional!
I was born a month before and was Christen that day about 4 hours before the attack.
Thanks for the pics. Love that 55 Nomad, but hate the flames, they look like spaghetti!
Brett, I like your stuff, good job!
In1955 I was 13 and a couple of 19 -20 year old guys had a Model A roadster and a 32 coupe, both Rockel Olds powered in a garage down the block...
hi everyone, a little help!!!
In my sons new house, we did a wall in old barn boards and brick tiles. He wanted something different painted on the wall. I came up with an old...
bump
Separate names with a comma.
The Jalopy Journal
