The Jalopy Journal
I remember them looking like that I'll and pull the valve cover tomorrow and double check the lifters on the last cylinder
I've had the car since 2005 and drive it regularly. I've rebuilt the engine once the lifters all looked solid
I recently replaced the head gasket on my 1954 chevy 235. I was adjusting the solid lifters and noticed that my number 6 intake lifter pushes down...
I have a 1954 Chevy 210 3 speed rearend that I have used carefree for years. I believe the pinyin bearing went out and I'll be taking it apart to...
I found another rearend nearby that I'm gonna pickup in the next few days can anyone confirm if a 51 3 speed torque tube rearend will fit a 54 3...
Awesome thread had alot of information I hope it's something as easy as a clip and larger spacer block Sent from my SM-J327V using The H.A.M.B....
Thought about that one rearend is too solid for that and I measured from the axle to the perches it's pretty square. Sent from my SM-J327V using...
Thank you for the input. It baffles me too how its moving I'm starting to think it's the carrier bearing some how. Its moving 1/4 atleast side to...
Nobody around anymore that still has knowledge on the original equipment? Sent from my SM-J327V using The H.A.M.B. mobile app
I've been hunting down a horrible clunk and vibration. It happened one morning when I put the car into reverse. The car drove home fine the day...
It kinda seemed like the solid shaft was pushed to the top of the enclosure tube. It might have been the way I had the front jacked up though....
Can anyone verify if there's a ujoint at the rear of the enclosed drive shaft on the 54 Chevy? I could only find information on the front ujoint...
I found the manual and I guess there is supposed to be clips holding the you ujoint in on two sides. I'm thinking something happened and broke the...
Yes on a normal open driveline car there is no play in the drive shaft this is an enclosed driveline and there's no locking pins to keep the...
I have a 1954 Chevy 210 with a 235 manual transmission. About two days ago I put the car in reverse and heard a noise that made me feel like the...
5 carburetors not frozen all need rebuild. Two Holley 94 59s 45.oo ea. Two Rochester 1bbl manual choke 30.oo ea. 1931 model a cross member 60.oo....
1931 ford coupe project. It's chopped and channeled. Still needs most of the floor work. Sits on a so cal step notched frame. Open drive 1931...
Two drums in decent shape local pickup only 40 bucks. As is
City: Oceanside State: California Price: $40 USD City: Oceanside State: California Price: $80 USD For sale I have a 1931 model a front cross...
Hey everybody I need some wiring help, I'm working on a 1947 Ford 1.5 ton with a v8 flathead. The engine has a three pole generator but I can't...
You cannot swap the pumpkin from a open driveline to the closed driveline. the 55 rear end is similar in dimensions but it is a different rear all...
Are you talking about the back of the starter? I believe there's a felt washer and and a small spring at the back of the armature. theres a larger...
You dont need disc brakes unless your running a V8 or you like to spend money. If the drums are properly adjusted and you have no leaking...
Out here on the west side I mostly see rust in the back of the trunk along the edge, also the floor boards and bottom corners of the doors and the...
car looks great, love the interior too.
Separate names with a comma.
The Jalopy Journal
