The Jalopy Journal
Pro-Mac, It was nice talking to you also, I sure wish you could make it this year. Your Pop's old roadster, is just plain Bitchen, get...
Its a crankcase air breather, from a 1935-36 ford....Ed
Dan, this is the original Ford part number 21C-7052, any good bearing store, should be able to cross this number over for you........Ed
By looking at the center molding, on the hood, i would say 1940....Ed
I have a 1940 KR-Wilson catalog....do you need part numbers, for the engine stand, and the different adapters?...Ed
Anyone, wanting to get in touch with Vern Tardel, send him a Fax, to (707)838-6065. This is the only way the guy will get your parts order, or...
I had a 1959 corvette single quad air cleaner, that was made from aluminum, with louvers on the side. It was a very thin, and was made to fit the...
This is what i have on Stromberg CFM. 97...150 48...175 81...135 LZ...160 ............ Ed
Is the frame one piece, or are there heim-joints along side the seat, holding the rear section on. This picture looks like the steering hoop is...
Your kart is a 1964-65 Dart Kart, Grand Prix, or a Dart A-Bone, if you post some more pictures of the side of the frame, i can tell you for sure...
I know 15 X 12 Ansen rims are pretty rare, but that sure seems like alot of money to me. I sold two 15 X 11 Halibrands on ebay for 700.00, and was...
This same person, was advertizing 35 ford parts on fordbarn, a month or so ago. Her ad, stated the parts were from her late Fathers estate. You...
Rat, here is alittle more of the right side....Ed [IMG]
Rat, here is a picture of the valve cover, and manifold area. I have a picture of the left side also, but not sure how to post more than one...
Rat, I'll have pictures of both sides of the engine, tomorrow afternoon....Ed
Is there any certain area or side of the engine that you want to see? Keith Tardel, built this engine, and I will be at his shop tomorrow, and i...
The 671 will fit the ardun, but the stock GMC flange was pruned off, of the case. The blower was setup by BDS, and I'am not sure if the case...
The original gasket, was a thin black paper gasket, that didn't hold up. The revised gasket, was made from very thin metal, with a raised rib in...
Yea, the V-10 has the one piece rear main seal, and the first ones would leak. They came put with a seal that was made from a different material,...
The only problems i have seen with the truck V-10, was the cylinder heads cracking. The castings are pretty thin, and like everything else, made...
The truck V-10 uses the 360 V8 rockerarms, lifters, and pushrods. The Viper V-10 is all special to Viper only, nothing will enterchange between...
The two engines are completly different, except there both V-10's with 488 cubic inches. The V10 truck engine uses 360 rods and pistons, and the...
Dickster, I just got these with some other parts, last sunday. I have two, and there both NOS, if your interested in them, make me an offer. I...
Todd, the book i have shows that number as a 1968 327 passenger car cast iron q-jet manifold, used on chevelle, corvette, camaro, nova...Ed
Dan, i just checked the fit on a Holley carb, and you are corect, fits the bolt pattern perfect. The 3314 number is hand stamped into the adapter,...
Dan i just went out, and tried this adapter on a factory 327 300hp AFB manifold, and it dosen't fit. This adapter tappers in at the center, of...
Can someone ID this offenhauser adapter? it mounts two stromburg carbs, to some type of 4 barrel manifold, pt# 3314, thanks...Ed
Greg, here are the spec's for the Isky pontiac 280 grind. Part #901-cy, grind 280HYD, type road & drag, Intake 32-68 Exhaust 68-32, Lift .440,...
Sorry, but the catalog that i have only list chrysler hemi cams, nothing for the dodge hemi. The hardface overlay cam looks like a roller, and...
Greg, this is what info i have....Hydraulic Series Grind # 280 HYD 310 "...
Separate names with a comma.