The Jalopy Journal
Here is a pic of one mounted on a 16 inch 40 Ford wheel. [ATTACH]
Set of 3 original Lyons of Detroit accessory ribbed wheel covers. Fits 1939-40 wheels. All clips are intact, very nice, only a few tiny dings, no...
A friend of mine learned the hard way with a low budget movie. His car came back dented, with holes drilled in the dash and the roof for camera...
The rule is, squeeze one stripe of hardner the width of, or across your blob of filler. mix it in.
Thats a Model T Ford key, later T and A keys had a lock groove in them. Check out keys in pic links below...
Even a lame hotrod movie can be an epic after a few beers and a can of beans...
Thats filler expanding due to being too thick and probably mutiple layers. Add the sun's heat and pow, zap, dink and zowee. At least those are the...
I thought it wasn't traditional unless you pay 8 grand...:D
I've seen guys use olive drab canvas tarps, even old army tents. http://www.tarpsplus.com/canvastarps.html
Insert a 1/2 drill bit lengthwise, insert half filled tube/vial of mercury, once ideal inertial weight shift amount of mercury is discovered, plug...
All you need to know here at this link... http://www.vanpeltsales.com/FH_web/flathead_startup.htm
Not trying to be a dick head, but is it possible to be a dickhead and have a pair of dick heads?
The small timing mark is not necessarily where the timing needs to stay. It is a starting point, find the sweet spot by advancing it. Plus, what...
http://socalcarculture.com/Images/040911TrompersSwap.pdf
Still sold on ebay......
The 4 door one will fit- but the top corner where the door closes will need to be cut and brought down a tad, maybe a half inch to fit. Coupe...
Play with the timing. The mark is usually off a bit and you have to find the sweet spot. Is it the chevy conversion bubba dist? If not, is your...
http://www.vanpeltsales.com/FH_web/flathead_startup.htm
Is this the one?:)
What a waste. He could have at least saved it for the dinner table.
Here is my favorite.
I had a similar problem, it was a chunk of debris, that was clogging the tank like a little valve whenever it felt like it. You would be suprised...
First of all, check to make sure the rockers arent hitting the new valve cover inside. Next, take a long screwdriver or piece of wood and poke...
Here
This is what we call a "Schadenfreude" moment. Schadenfreude
Here is the same road after the earthquake, splitscreen! http://www.youtube.com/watch?v=GJ7Ff96tHQM
"Ran before parked"
I stay away from center lift racks, things can go wrong, as the video below shows. http://www.youtube.com/watch?v=3atlG-47Gz0
Theres one on ebay starting at 3 large...:eek: http://cgi.ebay.com/ebaymotors/Ford-Model-B-Dodd-OHV-cylinder-head-/120632009383
At least the joint is traditional, as in "traditionally stupid"
Separate names with a comma.