The Jalopy Journal
Randy, What more can I say that hasn't been said. Very glad to hear that you are OK.
I agree with you and have attempted to point this out in my two previous posts. This poster seems determined to do it "his" way though and...
Before you cut open the floor in hopes of finding any stamped numbers on the frame, read my reply to you above at responce #22. The inspectors...
Glad to read that you are still working on your 'T'. The Speedway (and others) AHC coated headers will hold up well if you will follow one...
My comments above are from my own personal experience when registering a 1931 Ford Roadster in 2010. The roadster had papers from New Hampshire...
Starting about three or four years ago, ALL vehicles from out of state were required to be inspected by the License & Theft Bureau before a new...
The thread size is 11/16-18. Available in right hand and left hand threads. Aftermarket company's offer the bungs as well as the correct tie rod...
Several years back I had to get three appraisals to submit to a bond company as part of the application for a new North Carloina title for a 1948...
IF the vacuum advance cannister is connected to FULL manifold vacuum source, when you go to WOT the vacuum drops to '0' and there is no vacuum...
I used to work in a machine section at the San Francisco Naval Shipyard at Hunter's Point. (Since closed many years). I performed thousands of...
My stock Model A doesn't have a separate transmission mount. Just the front engine mount and the two rear engine mounts.
From what I see in the pictures the engine still has the rear engine mounts. This would negate the need for a separate transmission mount.
Thank you for these photos. They are a big help.
Those pictures are a great help. Thank you. I have a concern about what is referred to as item #1501 in the above picture. At the present...
That's the problem. I usually don't read the instructions until after I've messed something up. I'm hoping to do it a little better this time...
I just received the interior wood kit for my '31 Ford Roadster. There are no pictures or instructions included. Had to order the screw...
Thanks to all who have replied. Great info that points me in the right direction. I brought the roadster home this past Saturday. Drove it on the...
Ok. I'm an old hotrodder that thinks I should know the answer but don't. I just took what I was told years ago for fact and accepted that. Now I...
Install the engine so that the mounting surface where the carb is installed is level front to rear and side to side. This will give you a 4 degree...
Just some additional info. For your application, I would replace or have the radiator repaired. For older cast iron blocks and heads, water...
I would not suggest using water glass for a radiator repair. Get the radiator fixed correctly or replace it. Water glass will work for cracks....
I'd suggest running a good 180 degree stat. If it doesn't have a small by-pass hole in it already; drill a 1/8" diameter hole in it. Running a 160...
Oh really? :confused: Where is the location that you can do this? I'd sure like to find a "new unchopped Model 'A' Ford". As far as I know, Ford...
Not exactly. The stock '28-'29 hood will not match up to the '32 shell. Here is an old picture of a '29 roadster with a '32 shell. The hood top...
These old photos are from my old coupe back in 1961. '32 Ford grille and shell that I installed using the stock Model 'A' hood and side panels....
Coker does NOT make the wheels they sell. They get their wheels from Wheel Vintique. Custom backspacing was not available either. Below are some...
The recent changes made the site pages too wide for the resolution I use on my 19" monitor. Other than changing the resolution that I use, how can...
You are obviously new here and don't know how to use the search button. Go to http://www.jalopyjournal.com/forum/showthread.php?t=138527 and you...
That would depend on how far you drove before the "SOUND POLICE" got you.:rolleyes: Just being a smart ass.:D Your mileage for around town...
Give Jason at http://www.earlywheel.com a call. Super guy and very quick turnaround. Quality work and products.
Separate names with a comma.