The Jalopy Journal
is your vacuum advance working
If you are talking about the coupler in the engine bay close to the rag joint. All the internals of the coupler are the same as HQ to HZ Holden,...
I soak the lifters in a container with oil just covering all the lifters by a 1/4", all lifters standing upright and leave then for an hour or so,...
[ATTACH]
[ATTACH] a couple of Edelbrock 500cfm performer's on a stroked 409, regularly driven, totally streetable at 10mpg
as a guy with some height, I like both, dependent on which body style, from a Ford point of view in coupes, 32 3 windows, 33 - 40 the proportions...
[ATTACH] [ATTACH] [ATTACH] After a long Hiatus doing other stuff, finally spent some hours (lots) doing chassis and body work, in the home...
some FE engines had a mirror image 105 (I always called it a 501) instead of the 352 cast on the front of the block
FE - 352 is the engine series, 332,352 390 351 Cleveland - 335 series, 302, 351 429-460 - 385 series please correct if I am wrong
[ATTACH] [ATTACH]
" Let me Abo's go loose Lou" [MEDIA]
RIP, he influenced me through his book "Street was fun in 51' "
The springs are re-popped and available through most of the ford dealers, the spring in the latch when replaced gets the outside door hanle in the...
Usually caused by a bad connection/termination, when overloads happen the majority of the time the neutral cable/connection fails, if it was me I...
go wih a small block and a 700R, same work
Been black for over 30 years, had a roadster that I painted black about to paint my 33 Black. a bit boring, but hey, I like black Hot Rods....
Go to http://www.348-409.com/forum/ lots of info and good advice, just remember to be respectful and no BS, it is a great site because of this.
not a "Custom" but a Custom 300 Business Sedan [ATTACH]
typically production model cars up until the late 70's with A/C came with a larger radiator. you may need to consider this once you have tried all...
Welcome to FE's I made gaskets out of 1mm aluminium, a smear of HT RTV on both sides and torqued the bolts upto 25lbft, would get 2 years out of...
I was there also, paid $ 10.00 for a signed photo.
I coat the cam liberally in Moly grease, to the point you can not see the cam itself. After priming the oil system I run at about 2500rpm for a...
Wow RIP Dave Had a neat array of cars and stuff, and a cool warehouse/shop in South SF condolences to his family and friends
there not spring plates for rear leaf springs, sandwich the rubber to spring ????
A Marr's car watch would be neat.
Separate names with a comma.