The Jalopy Journal
Trying to change the pan gasket on a 1964 Chevy c-10. I am assuming that it is the original 230, since the truck only has 40,00 on the odometer....
What ever happened to this car? am I the only one who wants to see it finished???
The suspense is killing me, followed this one for some time now. Any update?
Working on a 65 Rivi. Trying to get the switch pitch working. I was missing micro-switch, brackets, and kick-down plunger. Got all of those...
I drive my 6V chevy as my daily driver. The starter cranks the car over with barely a flick of the key. The headlights are bright, and I can not...
brand new tip, and all connections are tight.
while it is welding, it welds beautifully. For what its worth.
Using my little Lincoln MIG set up on gas, and everything is wired correctly. I have checked it 3 times. Last time I used the welder (a month...
And I am running a stock dash, so changing it out for an aftermarket fuel gauge is not much of an option.
Its a brand new sending unit as well.
When I bought my '54, it had been sitting for a while. One of the first things I did was to replace the gas tank. I bought one of those fancy...
http://www.automotivearticles.com/Clear_Bra_3M.shtml Here is a review for it. I googled 3M clear bra and came up with lots of results....
3M makes a product that they apply to the car, its clear, and you can only tell at the edge if you run your fingernail up against it. Its a hard...
Enjoy!
[IMG]
We need the dual speed motor, not the single speed, which seems to be harder to find. I have ordered several from more than one parts supplier,...
My coil is a plain old school black coil. I know it is the fuel issue for sure. I have a clear plastic fuel filter about 8" in front of the...
ok, so twice last week, now that we are above 95 degrees with 150% humidity, I have had vapor lock issues. I'm talking about my 54 Bel Air, 235...
car is packed. See you guys in the morning....
I will be there as well, hotel room booked. I can make no promises, but I will do my best to try and not do any drunken mini-bike burnouts in the...
I have a shop, and would love to work on your car. I can be reached at 918-361-5851 Bentley
the post from the other forum is referring to a non-self energizing brake system. So the post is in fact correct, the lead shoe should be the...
there is a search function, use it and I think you will find that 9 of 10 will advise him to go with a 3 wire.
Ok, so I was under the hood tinkering and I put pressure on one of the oil return lines that goes from the oil filter canister to the block....
I mounted mine on the garnish moulding using one of the screw holes from the factory.
nobody? Surely someone has something to contribute to this.
So I decided that I might try and go for a little different look on my chevy. I wanted to run wide white walls with some 72 spoke buick wires. I...
I keep all of them. Hang them on the wall. I call it my shrine to the gods of speed!
I can tell you its ugly. and it looks like someone either made it from scratch, or that its some late model crap. But that's just my opinion.
mercdeuce. The 6AL as well as the 6A, has a tach drive that sends out an unaltered signal that allows you to run a standard tach. No special...
Separate names with a comma.