The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH]
Baby wipes are great for cleaning up excess silicone sealer.
My 34 unknown photographer. [ATTACH]
I,m running a 60s Chevy pickup master cylinder. My brake and clutch were both really hard to operate. Had the brake side sleeved down to 15/16...
Quite like this myself [ATTACH]
I,m using a Tremec 5 speed trans behind my blown 354 Hemi and it works a treat . Using a hydraulic release bearing with a 7/8 master cylinder. A...
Any more pics or info on this one. I,ve never seen it before.
rusty my seat in the 34 moves forward so my wife can drive it.
That's what I used in my 34 but the one we have for the pickup only tilts back.
I narrowed a Voyager seat for my 34 and it works great. Just widening one to go in a 49 Chevy pickup. In the 34 the back of the seat hinges...
Haven't been available for a few years.
[ATTACH] Getting a bit concerned about the age of the 345 x 16 Truck radials on my coupe. Looking at possible replacements. I like the look of...
Looking good. I awoke my 34 from hibernation at the weekend and took it out for a blast too. Enjoy the show.
Thinking about putting one on here. By the time I cut a hole for the blower and put in some louvers there won't be much metal left.[ATTACH]
Running 345 x 55 x 16s BF Goodrich truck radials but don't know what I can replace them with.
And I still don't know where to get my tires, tars , tyres?
That would be me then. It's spelt tyres over here in England. I suppose if I was over there I would spell it tires. Good old Queen Elizabeth said...
Ok so what wide 16" tyres are people using now that BF Goodrich truck radials are a thing of the past?
And if anyone's interested here's the front view.[ATTACH]
Here ya go...[ATTACH]
Full story here...[ATTACH]
Very cool hot rod now living in the U.K.[ATTACH]
Rear gear is 3.7 and tires are either 30.5" or 31" will have to check.[ATTACH]
Got one in my 34. No complaints. 2000 rpm in fifth gives me 80mph.
I used one of these mounted to the firewall on my 34. I have discs on the front and a Ford 9” with drums on the rear (no power booster) The master...
Got one on my 34 (sorry don't seem to have any pics of it open) but I always make sure it shut tight before going to warp speed. [ATTACH]
The sleeved cylinder did get an internal residual valve. I have removed the other RPVs . I now have a good pedal with no drag on the front...
Think I will take the valve out. I tell other people only change one thing at a time.
I fitted the sleeved cylinder and valve at the same time.
Separate names with a comma.
The Jalopy Journal
