The Jalopy Journal
Looking at the powerline web site, it would be real doubtful that they ever made any fiberglass bodies in house. Perhaps if you call them they...
People forget how expensive air conditioning was as an option on cars back when. It wasn't that no one wanted it and everyone just preferred to...
Spend a few bucks and have it blasted. All a wire wheel really does is sorta slick up the surface, but any rust you want to get rid of is still...
That tire is made for use on 2 piece wheels. That it is a tube type and uses a flap is the proof. The contour of the bead seat area of a single...
Back before they went metric, the contents on a fifth of liquor was listed on the label as 4/5 quart rather than 1/5 gallon. Both the same thing...
Cragar wheels had steel inserts cast into the aluminum centers and the centers are welded into the steel rims via welding at the steel inserts....
Post #32 up above has a screen shot of all pics and the ad. $45K to purchase plus another $75K and you'd have a $60K car. Sounds like a great...
The media you use can make a big difference in the amount of dust produced. I use Dupont Starblast and it isn't nearly as bad for dusting as some...
In addition to all the above, true kingpin bushing reamers are somewhat hard to find (compared to what a lot of sellers are calling kingpin...
WOW... nice work
There's a man who posts regularly on the SPI user forum who is a custom painter. He's pretty much stopped doing any regular paint work and now...
Saw a 12" Parks wood planer on CL about a year ago for $350. I'd been looking for a planer for a while and the pics looked pretty good. I could...
Worth mentioning that you can't assume hubcaps are plated steel just because they're magnetic. Most all stainless auto trim parts are type 430...
Not quite true. The only consistent dimension of pipe is the OD. The size is nominal and not true to the stated size on the ID. Take 2" pipe...
I agree with Claymart that the finish on the face doesn't look right, or at least it doesn't look like the finish on any quality lifter I've ever...
Good write up on initial, mechanical, and vacuum advance....
Somewhat OT, but a good demonstration of the importance of doing stuff right on any fastener locking devices. Niece's husband takes her '18...
So, would darker shades of tan be cornbread?
Ecklers was okay back when they handled only Corvette stuff and had a paper catalog. Went to hell when they started growing by buying out other...
Several places in my area to buy ethanol free. Strange thing is the price. Some are around 30 cents more than alky regular while others are more...
No doors but I bought an aftermarket hood and front fender for my OT 92 Silverado. Hood fit perfectly. Fender had to slot a couple of the...
Seems to eliminate a sticking clutch cable as that would leave the clutch disengaged. Any chance the brake hose going from the frame to the rear...
To clarify, did it act like the wheels were locked up or did it act like there was no driveshaft?
I took a 289 Ford block to a shop in the summer of 1970 to have it hot tanked, cam bearings installed, and bored and honed for 30 over pistons....
https://www.summitracing.com/parts/sum-906784 Easiest valve spring compressor I've ever used. Well worth the money. Ignore the video associated...
The most popular optical tracer by far is the Westinghouse HL-90. When Westinghouse stopped making them, I think it was Koike Aronson who...
The 350hp 350 in my OT 69 Vette came with a windage tray from the factory. I had the motor apart back in the 80's but its been too long to...
If I could go back to just the late 70's or early 80's, I'd buy every cheap VW bus I could get my hands on. I wouldn't give a nickel for one if I...
Suggest you post this question at spiuserforum.com Bunch of guys there who make these sorts of repairs regularly and can give you accurate advice...
Based on pics of early volkswagens, they started with a fairly small 4 lug pattern in 1937 and changed to the wide 5 pattern at some later time.
Separate names with a comma.