The Jalopy Journal
'30 Ford roadster with dual Ford F150 EcoBoost Tubro Chargers... [ATTACH]
If my memory is correct on the '48 truck 8ba fuel pump push rod bushing it has a large oil galley hole and the fuel pump rod must be used or plug...
Good to see you back again Dave ......
I have two av8's with Sanderson headers and haven't had a leak problem, a friend also has two av8's and no problem with his either. I use just a...
in a '30 pickup [IMG]
Now that is one fine looking related part you have there .... hope you show a picture of the finished bottom end. Vergil
The bump on the pulley is 2º before TDC. Around 5/16" is 6º so you could advance it another 1/4". You might put box fans in front of the radiator...
Killer .....
Great vid ... and you are correct ... it's looking good Buddy
They fit the channels snug but I also put a few dabs of "GOOP" on them and have never had a problem with them.
I use the same window channel in my A's as I do in my '37 Chevy. Works great plus has the nice little stainless steel rolled edges (made for the...
I guess I am not traditional but I still like the looks and will be the first to point out any non traditional changes to my '30 pickup. I have...
My '30 [IMG]
If it doesn't the master cylinder piston will not come out far enough to expose the hole for the brake fluid to transfer back into the reservoir...
Thanks for the update ... was wondering Vergil
The crank will fit just fine with no machining, the mercury block is the same as the ford. Go with the mercury crank, ford and mercury use the...
If the above suggestions didn't solve it, flip the spring and see if the problem moves to the other side, if it did a new spring is next ... just...
Great pictures, was there three days and you captured a lot I missed ... thanks ... and having my pickup included in your pictures is a bonus .......
Built my tank but used their in tank fuel pump setup (fuel injection) and it has worked good for 6000 miles ...
Amazing .... I use Solidworks but after watching how advanced the thinking and simulations are I feel like I use mine as an Etch-a-Sketch ......
Thanks for the update, appreciated ...
Jack with your outlook it will go great .... Vergil
Gary ... Jack ... thanks Vergil
Jack I had never put a top in either, here is the thread of how I done mine http://www.jalopyjournal.com/forum/showthread.php?t=197551 Vergil
That should work, used a "Tanks" fuel pump in my '30 pickup and had to lengthen it, not much is simple anymore. If you ever visit your cuz give me...
High pressure pumps like being in the gas tank (they run cooler and are quieter) but they can be mounted outside the tank. They do not like...
When mounting the fuel injection in the valve chest of my 8ba I used Henkel Hysol, a 2 part mixture to smooth the block casting so the o-rings...
I took 4" out of my coupe fenders, http://www.jalopyjournal.com/forum/showthread.php?t=147250
Here is a couple of picts of mine ... installed a glove box behind the bucket seats ... [IMG] [IMG] [IMG] [IMG] Vergil
Separate names with a comma.