The Jalopy Journal
My suggestion is to go to a local community college for a semester or two and take the GTAW (tig) class.. Here 1 semester cost about $250 .. Two...
Cool... Good work! Posted using the Full Custom H.A.M.B. App! Using iPhone 6
I'm putting 250 in my 54 with t5 behind it.. Made my own motor mounts, made my own trans mount.. Will have to cut the fire wall and make trans...
55-57 Chevy rear works too.. If it's going to be low and slow.. I have 57 in my 54 Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Your post is exactly me 4 years ago maybe more.. I was lucky enough to have a guy from here have me over to his house and teach me a few things.....
I'm going to cut glass first on my 54.. Once the glass is cut you can make patterns and make metal fit.. Easier to cut, bend, shrink, stretch and...
Sure no prob.. Good luck.. Posted using the Full Custom H.A.M.B. App! Using iPhone 6
How i did mine.. Mine is triangulated 4 link.. First i got everything level at ride height and pinion angle set 3* up .. The first brackets I...
Midwest fabriaction does one I believe ... Bob bleed is a cool dude check them out Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Built this a few months back.. The internals were done by a guy on metal meet named Rick. I made everything else .. Basically just a copy of his...
You can keep the front suspension.. But the torque tube and rear setup have to go.. Which means prob new trans, drive shaft and new rear end ....
I got the internals done by a guy on a different site... However the side plates are way to heavy to ship.. Any one with a bridgeport that is...
I'm sure they do or you could find a parts car.. I would probably build one.. If your willing to cut out the old anyway and weld in a patch I...
I am planning a build of a power bead roller! I am looking for someone in the DFW Metro plex that can help me turn down two pieces of 7/8 cold...
I think Berkys deserves to be up there.. Not only did he take it from what it was to what it is .. But all on his first build and learning at the...
That should be easy to do... Play it on the computer .., pause it and then screen shot it with .. Screen hunter, snipping tool or snag it.. Or a...
Any luck ? Posted using the Full Custom H.A.M.B. App! Using iPhone 6
http://youtu.be/epGuly8x4uU Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Sweet !! Can't wait!! John Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Well didn't see the post two posts up!! If that works out let us know !!! Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Contact psychomoto here on the hamb.. He is up here in dallas area.. I think lewisville .. I plan on contacting him when I do my chop.. I have...
Yes thank you .. I got several offers via pm to help.. However the guy I was dealing with sold the items out from under me.. Thanks John...
I am chopping my 54, back glass i have 50 Chevy coupe glass that will be going in. It's going to be a 2 3/4inch chop up front, the rear will be...
The biggest advice I can give you from a guy doing his first ground up frame off build. Before you spend any money on a car if you do not already...
Hello this is john from dallas tx. I found a couple of metal shaping goodies there in Manchester New Hampshire. I need a little help getting...
Thanks I called the one here last week the kid that answered the phone said "napa was not a mechanic shop just a parts store!" So I'm guessing...
Ok thanks Posted using the Full Custom H.A.M.B. App! Using iPhone 6
Hoping the hamb can help me out. I have new bearings for my 57 Chevy rear axle that is going under my 54. I was hoping someone near Plano had a...
Looks good !!! Posted using the Full Custom H.A.M.B. App!
It could be done to make them roll down but would require a lot of work. They best option in my opinion is to slant them and make a pattern of the...
Separate names with a comma.