Register now to get rid of these ads!

Technical Who makes the best repro 32 frame (stock style)

Discussion in 'Traditional Hot Rods' started by Ball and Chain, Sep 2, 2015.

  1. Ball and Chain
    Joined: Mar 24, 2008
    Posts: 1,155

    Ball and Chain
    Member
    from Nor Cal

    Looking for a 32 frame to build for a 31 model a, but i want stock style rails and crossmembers no tubular k member, lowered front crossmembers or coil over mounts ect?

    Thanks!
     
  2. I couldn't find a place that had a reproduction of the original. You can buy just the new stamped rails from ASC in Mississippi and then add your own crossmembers.
     
  3. DDDenny
    Joined: Feb 6, 2015
    Posts: 19,138

    DDDenny
    Member
    from oregon

    Ionia Rod Shop has a neat interpretation of what you speak (I think).
     
  4. JW rod garage in New Belgium Wi has great chassis. Can build exactly what you want. Tallented crew. Have been by their shop and a top notch company.
    Vic
     

  5. Flathead Dave
    Joined: Mar 21, 2014
    Posts: 3,959

    Flathead Dave
    ALLIANCE MEMBER
    from So. Cal.

    Take a look at Classic Street Rod MFG. Ontario, Ca. Nice frames. Jig built.

    760 E. Francis St.
    Ontario, Ca 91761
    909.923.3233
     
  6. 32 roadsters build pics 026.jpg
    X 2 on Hugo and Osmin 32 roadsters build pics 026.jpg
     
  7. ratrod0
    Joined: Apr 15, 2005
    Posts: 1,150

    ratrod0
    Member

    Clark hotrods near Orman beach FLA.
     
  8. Deuced Up!
    Joined: Feb 8, 2008
    Posts: 4,206

    Deuced Up!
    ALLIANCE MEMBER

    Hot Shoe Hot Rods - Mt. Vernon, MO
    They did a Pinched 32 Rail Frame for my Model "A" Sedan.
    Very nice work...
     
  9. Shamus
    Joined: Jul 20, 2005
    Posts: 1,247

    Shamus
    Member
    from NC

  10. Jimmy White - Circle City Hot Rods in Orange CA. Jimmy's a member here too
     
  11. ratrod0
    Joined: Apr 15, 2005
    Posts: 1,150

    ratrod0
    Member

    Clark hotrods makes the original K-member and front, rear crossmembers.
     
  12. racemad55
    Joined: Dec 14, 2005
    Posts: 1,149

    racemad55
    Member

    I've got one in the classifieds here, brand new a.s.c. rails with stock 32 crossmembers riveted in.
     
  13. TKEBH964
    Joined: Jul 15, 2008
    Posts: 216

    TKEBH964
    Member
    from MO

  14. amadeus
    Joined: Dec 27, 2006
    Posts: 321

    amadeus
    Member

    Gary At "Blackboard Hot Rods"!

    Great products and super nice guy!
    Gary Maxwell 661 205 1190

    Also,
    If you have the rails only; look into Industrial Chassis for the Cross members, pedals, or possibly an entire frame; Steve (El Polacko here on the HAMB) is a chassis genius!

    Industrial Chassis Inc.
    3536 W. Osborn
    Suite 5
    Phoenix, AZ 85019
     
  15. thirtytwo
    Joined: Dec 19, 2003
    Posts: 2,639

    thirtytwo
    Member

    The only thing I have seen offered is a pretty neat setup by el polocko ( industrial chassis in Phoenix ,az otherwise a few places will deviate from their norm, but not many...

    I know kiwi konnection in Bakersfield ,ca will take your supplied parts and install them in a frame if you wish, I saw one they did a few years back , stepboxed , stock A front cross and a flatened 40 rear cross with 34 x member... Was pretty nice

    Other than that its just a hot rod shop custom build type deal
     
  16. mason4bama
    Joined: Sep 5, 2015
    Posts: 3

    mason4bama

    Take a look at Cornhuskers rod and custom. I think you would like what you see.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.