The Jalopy Journal
I am planning to use various engines which I already have build. First with the 36 HP class and go to El Mirage and see how it will perform than...
Thank You to all of you for been so positive with me to build this tank with a VW running gear. This weekend we are planning to buy the tubing for...
I did measure my tank and the lenght is 128 inches long from tip to tip. Frenchy
This particular tank is from a P38 a friend of mine had it in his back yard and told him if he wanted to sell it to let me know so I was lucky to...
Richard I cut the above the seam with a die grinder I was going and use my plasma cutter but I wanted a nice clean cut and it took me a few...
Man I am stoke all these positive feedback on my project Thank You everyone. I have many good ideas for this one. No fan housing but I will be...
So far Thank You for the great feedback. I will start with a 36 HP motor going to El Mirage and after build a 2165cc or 2332cc with 48 IDA...
Thank You ! just past history. This one will be cool I already have the engine ,trans,front beam etc ... Thanks Frenchy
I did get a lot of various reactions when I had it out the first day making a dolly for it some of the comments why do you have a bomb or why do...
Beside working on my 1931 Track T Roadster I knew I needed another project. I bought this tank from a good friend as you can see in the pictures...
This down draft tube is from a later Ford and had a steel wedge made to weld to the side of the oil pan works well. Frenchy
Give me a call when you have time and I can help you. Frenchy 1 800 764-0406
When you separate the two half do you cut the one half where there is no lip and make a lip for the other half is this how I have to do it....
Mike I was lucky that the firewall on the Denver Deuce has a recess so the engine could be set back. The frame are from American stamping. I had...
Separate names with a comma.
The Jalopy Journal