The Jalopy Journal
is this going to be an issue? so when you run an external resister you can bypass the resister when starting, with an internal you dont have that...
i'll go with a stick welder as well, just an ac one is fine, easy to see a puddle, takes some skill to get an arc started and run a nice even...
try them out before sending them anywhere, if they have O-rings make sure they are good or replace them.
I open cans all the time for marbles, some are almost new and just wont spray, i guess after doing maybe 100 I have it figured out, i lay the can...
how do I tell if I can bore my 283 out to 4"
would a stock 28 chevy blow the doors off a 28 model-A?
looking great Ron, I need to come for a vist
I say buy a gas welder, I saw a nice little miller mig at a swap meet for $200 a month or so ago, I have 5 millers now, two migs, two sticks and a...
anyone know what type of steel is used, 4140?
looking great, need to keep track of this build
nice work, one set at a time
sorry i do not have any pics of mine, it was two pieces of 8" flue pipe about 4 ft long joined with flex pipe, the arms that the tubes were...
i have built a few dust collectors in the past, i used a squirrel cage blower inside a sheet metal box, there is an opening for the air to exit...
you may have posted this a few years ago but what will your top speed be?
Separate names with a comma.
The Jalopy Journal