The Jalopy Journal
I put a Jaguar xj6 front on my 53. Improvement on every level. If you're going in go all in.
I have a little hobart with the MIG conversion kit. welds all kinds of stuff. Big stick lincoln if I ever need to weld 1/2".
I saw a 500 in a chevette on Power Tour, back in 97, 98 or so. Tubbed and everything. It was glorious.
You can buy a kit to use a dual chamber master in the stock location. I believe ECI sold one as did a guy in the PNW. I made my own from 1/8 steel...
Brake light switch is not anywhere near the mc. Two problems, causation is not correlation and vice versa. Take this opportunity to really fix...
The parts have to match. If you don't have the correct bore, you are using too much stroke to actuate the pistons in the disc. When I swapped the...
I miss my car. :(
F***ing newbs.
just get some weld on perches for the s10 rear and you're good to go. the 55-57 rears fit right up. just drill a new hole for the pilot pin to...
I had this setup on mine after I put the jag front end (big calipers). Hope this helps. [IMG]
Separate names with a comma.