Who Makes Or Sells Dropped Spindles For 49-52 Chevy Cars?

[MarkX]

I'm workin on my 52 chevy to get it ready for the Lonestar Round-Up and I want-need to put Dropped Spindles on it but I haven't been able to find any. I know they're out there does anybody know who I need to contact about that? or does anyone have some they might be willing to sell me? I'm also looking for a front disc brake conversion kit for the original or dropped spindles on the original suspension. Please and Thank you!

[53_210]

Try www.nationalchevyassoc.com/ (http://www.nationalchevyassoc.com/)

Derrick

[low springs]

check out www.speedwaymotors.com (http://www.speedwaymotors.com) they have disc brakes kit.

also check out www.butchsrodshop.com (http://www.butchsrodshop.com) for the drop spindles.

[daddyo54]

I've got a friend that has the dropped uprights, offset steering arm,and shocks for your car everythings new he wants $300 for it all and will throw in a set of lowering blocks and shackles for those narrow stock leaf springs.

[daddyo54]

Let me know i'm not that far from you I'll try to help you out.

[Zodoff]

Uprights from a 54 will drop it about an inch..
If I remember correctly,that is..

[chopolds]

If you've got one of these old Chevies, you really need catalogs from RB's, and Chev's of the 40's. Both contain both stock and custom parts for 39-54 Chevies. Everything from trim, to engine parts, to suspension, to stock upholstery.

[JamesG]

Bag it!......................

[gears-n-grease]

most of the suppliers gets their stuff from http://www.fatmanfab.com - speedway sells converion spindle kits but the spindles then require machining - this kit is one of the better ones that dont require machining- http://www.ecihotrodbrakes.com/early_chevy_discbrake_conversions.html

[gonowhere]

[ QUOTE ]
most of the suppliers gets their stuff from http://www.fatmanfab.com - speedway sells converion spindle kits but the spindles then require machining - this kit is one of the better ones that dont require machining- http://www.ecihotrodbrakes.com/early_chevy_discbrake_conversions.html

[/ QUOTE ]Yeah, my friend has a 49 fleeetline, and got dropped spindles from fatman. They were not cheap!

[daddyo54]

I think my friend has springs that go with this stuff too I'll find out.

[ethel p smith]

hi I can not get butchsrodshop.com on this email do they have another email or am I doing something wrong ethelpsm@yahoo.com

[flt-blk]

When did you get a 53 chevy.
I don't know if I can halde a dual thrash on your car and the ElCamino with my
current travel schedule.

I'll call you tonight.
TZ

[Tugmaster]

If the deal with Daddyo54 falls through you should contact Buffalo ent. He advertises on inliners.org. He can drop/ modify your original spindles 2 1/4" for $250 He also has rings you can weld into your lower control arm which allows you to run Camaro shocks.


Todd

[blown49]

check out www.speedwaymotors.com (http://www.speedwaymotors.com) they have disc brakes kit.

also check out www.butchsrodshop.com (http://www.butchsrodshop.com) for the drop spindles.

Butch sold his business several years ago, don't think that addy will work anymore.

[Fleet1950]

When I bought mine a while back I found that all of the big name ones widened the track 1.5'' total . I wanted to run some reverse wheels and didnt want it any wider. So I found a guy in Arlington Washington who makes\sells parts for the 37-54 chevy cars. His company name is Buffalo Enterprises and he has the knuckles that you need 2 1/4'' drop if i remember right. Sorry I do not have a number but you should be able to find it.

[rustypipes]

I just put a set of Fatman dropped uprights on my chevy with bags, My girlfriend got them for me for xmas through Alex Gambino, Pm Him, He's a fat man dealer

http://img406.imageshack.us/img406/5539/dumpqx4.jpg (http://imageshack.us)

[flt-blk]

Ethyl-P-Smith you are a fucking idiot.

This post is 3 years old. The deal with Dadio54 went down the car was
finished driven and has been sold long ago.

Do an intro and stop being stupid dredging up old junk.

[spoons]

hi I can not get butchsrodshop.com on this email do they have another email or am I doing something wrong ethelpsm@yahoo.com


Butch Retired 4 years ago....

Spoons

[Gambino_Kustoms]

most of the suppliers gets their stuff from http://www.fatmanfab.com - speedway sells converion spindle kits but the spindles then require machining - this kit is one of the better ones that dont require machining- http://www.ecihotrodbrakes.com/early_chevy_discbrake_conversions.html
gambino kustoms is a dealer for fatman

[Anderson]

Hahaha......I was about to ask where the new car came from and why Mark didn't say anything about it yesterday!

Damn, now I wish you would get another '52. Geez that was good times.

[daddyo54]

Lets do the time warp again!