Panel clamps

[ironpile]

Here is a panel clamp thats easy to make and works great. Made with 1" square tubing,3/16th threaded rod, wing nut ,washer, 1/8th " steel rod,strip of .040 sheet . Hole in sq tubing is 5/16th to allow assembly, weld threaded rod to small piece of sheet metal,drill 1/8th hole 1/4" below weld.Cut slot in tube with cutoff wheel and assemble. Use as many as you need to get good results http://photobucket.com/albums/b57/Ironpile/My%20stuff/th_IM000205.jpg (http://photobucket.com/albums/b57/Ironpile/My%20stuff/?action=view&current=IM000205.jpg) IM000205#1 pic is how it looks in action http://photobucket.com/albums/b57/Ironpile/My%20stuff/th_IM000201.jpg (http://photobucket.com/albums/b57/Ironpile/My%20stuff/?action=view&current=IM000201.jpg) IM000201 http://photobucket.com/albums/b57/Ironpile/My%20stuff/th_IM000202.jpg (http://photobucket.com/albums/b57/Ironpile/My%20stuff/?action=view&current=IM000202.jpg) IM000202

[Paul]

is this a test thread?

if you like it can be moved to the main forum.