PDA

View Full Version : 54 Dodge Inline Flat SIX - Specs - Need some help -


so-cheap
12-24-2003, 03:00 PM
I have a 54 Dodge with the flat 6 in it.
Well it needs some tuning up and I can't seem to find specs anywhere.

I need Timing, Dwell or Gap, Plug Gap and anything else you think might help out.

The car sounds like it is running pretty rough, though driveable. It just has zero power compared to what I 'THINK' it should be.

I also have a couple cyliders fouling the plugs (rear two).

Any help would be much appreciated.
Thanks HAMBers.

shoebox72
12-24-2003, 03:12 PM
Plug gap:.035
Point gap:.020
Dwell: 39
Ign. timing:2b
timing mark:Dmpr.
compression: 135 @ 150 rpm
Idle speed: 475

Hope this helps

Billy

so-cheap
12-25-2003, 02:18 AM
Thanks Man! Merry Christmas