Chevrolet Tri Power Intake complete

[Zimzimah]

Hi,

I'm searching for a complete intake 3x2 for Chevrolet 350 engine including :
- Tri carb intake,
- 3 x rebuilt carbs
- progressive linkage,
- fuel line complete.

Thanks for your proposals.

Nicolas

PS : Delivery in Los Angeles CA.

[A tub]

quick question here, y not buy it all seperate, carbs arnt a big deal, linkage=simple (get em everywhere for cheap) fuel lines=cheap, fittings=cheap, i understand u wanting it all together but half of it isnt much to get anyhow, theres a guy with tri carb manifold for chev that posted today check it out grab some carbs, u can get em new and they dont leak, throw in whatever jets suit, fuel line u can get from ur local parts store , linkages arnt expensive even for them and postage, just throwing u some ides here, all meant in the best way ofcourse, sure its good to get it all ready to go, but not a hard task to take on to achieve and may cost less than u think, good luck and all the best A-tub

[Zimzimah]

Thank you all for your proposals and suggestions.

I don't have a local store where I can easily find some components as I live in France.

That's why I prefer a plug and play solution.

Still did not buy anything, keep on proposing deals !

Thanks.

NiCO

[indyn39]

Here are a couple of places to get complete 3 carb kits. Speedwaymotors.com and Summitmotors.com. There other places in the US you just need to do a search on the Web. Hope this will get you starts. I got my deuces at Speedway they cost less.

[Zimzimah]

Here are a couple of places to get complete 3 carb kits. Speedwaymotors.com and Summitmotors.com. There other places in the US you just need to do a search on the Web. Hope this will get you starts. I got my deuces at Speedway they cost less.

You bought the reproduction of the Stromberg 97 ??? Are you satisfied with it ?

I'm looking for a low price tri carb setup, so Speedway and Summit aren't the right place ! ;-) but thanks for the input anyway.

I love the Hamb and the general atmosphere. It rocks !

NiCO

[Pez]

Top guy.

http://dickshotrodcarbs.com/home.html
.
http://www.jalopyjournal.com/forum/member.php?u=2208
.
.

[Zimzimah]

Top guy.

http://dickshotrodcarbs.com/home.html
.
http://www.jalopyjournal.com/forum/member.php?u=2208
.
.

Thanks, just sent him an email !

NiCO

[A tub]

ey zimzimah , good work on the srtombergs, manifold shouldnt cost too,too much, in australia i paid a heap(maybe too much for what i wanted)postage is a clincher when u dont live in usa, try on here, other than that speedways are gd, 2nd hand intakes are usually not a problem especially for chev, linkages u can get from speedways, for fuel blocks etc maybe try obrien truckers or somewhere like that, u can get em from speedways if u like at same time, fuel fittings u should be able to get from any auto parts store, make sure u get the fuel fittings to suit the stromberg ( they have a special sealing angle to gaurentee no leaks,18 degrees i think), fuel line u can get from local auto parts store,clamps are simple, good luck with your set up hope ive helped ya

[Zimzimah]

Hi ! Thanks to you all for your help. I have ordered from Ron's Tripower. I'm sure it will go fine... complete, rebuilt, plug and play and cool price...

Thanks hambers !

[A tub]

gd stuff zimzim

[Zimzimah]

We can close.