Hello form a Shoeboxer

[Carnie]

Just wanted to drop a line and say howdy! I am currently working on a 49 Ford 2dr Sedan. The car has the original flathead 6, which was hard to find anyhting for. So, I purchased a 1950 rebuilt flathead 8 from the shoebox guru(Ray Marler) and waiting to drop her in. Has anyone here had any experiance with ez wiring and 12 volt conversion?
As far as the personal stuff, I am a Firefighter just outside Dallas with a Wife, one kiddo, and a dog. Anyway, I should be pulling the motor sometime next week with a couple of guys from the station (which can always be paid with beer)(crossing my fingers). Good Luck and look forward to future posts on the HAMB. [ QUOTE ]


[/ QUOTE ] When your at the bottom,at least you know which way is up!

[yorgatron]

hello.

[wingnutz]

Welcome carnie..., wingnutz here..., "Rush Chairman"..., "Damn glad to meet you...! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

There's plenty of Help here if you need it. And there's plenty of HAMBers in your neck of the woods!

Hope to see you in Austin for the "Lone Star Round Up"!!!

Mark

[Jethro]

Hey , another "Buckethead"...welcome.There are a few of us on the board from all over the place. I'm with local 913 in Kamloops British Columbia Canada.
I actually competed against some firefighters from Rowlett in the firefighter combat challenge in Tampa in 96.As I remember they were some big boys.
There's lots of shoebox guys here, so you should get lots of help.
Anyway, again welcome...Jethro

[HOTRODPRIMER]

Welcome,,,did anybody tell ya we would like to see pictures of your project? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif HRP

[onelow48]

Hello and welcome. I used a e-z wire harness in my 48.
I love it. It went in ez as 123.

[Ayers Garage]

Hello from another firefighter.

I work in a DFW mid-cities department.

[Missing Link]

Welcome. Sounds like a good project you have going on.
I have experience with EZ wire kits as I recently wired and converted my 46 flatty from 6v to 12v. How can I put this nicely? ummm, I guess I can't. EZ wire kits are, well, ummm...lets just say I will never use another one.
I also have a list of all the components I used to domplete the wiring. All new switches, sockets, etc. If you need some help or additional info feel free to send me a PM.

[Chopped54]

I just converted my 54 Chebby and wired it up with the EZ kit.
I am just across the bridge in Rockwall...
Shoot me a PM if ya have any questions.