grego31
11-14-2011, 02:54 PM
I have an almost complete flathead 59ab motor that I would like to find a new home for. Has everything from oil pan to intake, the only thing it is missing is the carb. Has the water pumps, dist, fuel pump, fan belt and bracket, stock exhaust manifolds, oil filter and all the sensors.
It has 59ab stamped on the bell housing and on both heads.
I bought it to put in my Model A but I have changed directions in the motor department. It looks like a good core but I have not taken off the heads or looked into it deeper. When I got it, it turned over by hand with the plugs out. I squirted oil in each cylinder than put a tarp over and there it sat for a time until now.
I have a engine hoist so it will not be too much trouble to get it loaded.
SOLD!!!
Thanks.
It has 59ab stamped on the bell housing and on both heads.
I bought it to put in my Model A but I have changed directions in the motor department. It looks like a good core but I have not taken off the heads or looked into it deeper. When I got it, it turned over by hand with the plugs out. I squirted oil in each cylinder than put a tarp over and there it sat for a time until now.
I have a engine hoist so it will not be too much trouble to get it loaded.
SOLD!!!
Thanks.